Turck
Turck
Radio Transmission System – Base Unit for Serial Sensors Node for Connecting External Sensors
SKU: 3026123 Type: DX80N2Q45TH
Available3–5 business days delivery
€375.50 / pieces
€446.84 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Protection class IP67
- Mechanical screw-in thread M30 × 1.5
- Connection via M12 × 1 female connector, 4-pin
- Integrated multi-color display lights
- 2.4 GHZ frequency band
- Frequency hopping FHSS
- Time division multiplex access - TDMA
- Operating voltage: 3.6…5.5 VDC
- Current consumption: ≤ 100 µA
- Supply via 2x 3.6 V Li-ion AA batteries, supplied with the device
- FCC-ID UE300DX80-2400 This device complies with FCC para. 15, sub para. C, 15.247 ETSI/EN: In compliance with EN 300 328: V1.7.1 (2006‐05)IC: 7044A‐DX8024
- Radiation protection 10 V/m for 80-2700 MHz acc. to EN 61000-6-2
Functional principle
The Q45 wireless nodes can be integrated into a DX80 wireless network in star topology. Thanks to the integrated battery, these devices work fully autonomously and can be connected directly with any DX80 gateway or DXM controller. Some models include a sensor element or can be connected to external sensors or other transducers. Depending on the type of operation, the battery service life may last several years. Conforms to EN 300 328: V2.2.2 (2019-02)
Mechanical data
| Relative humidity | from 0 to 90 % |
| Elektrischer Anschluss | Connector, M12 × 1, 4-pin |
| Ambient temperature | from -40 to 70 °C |
| Antenna connection | Internal (wire loop) |
| Storage temperature | from -40 to 70 °C |
| Design | Rectangular, Q45 |
| Housing material | Plastic, PBT |
| Housing material | Lexan, Black |
| Degree of protection (IP) | IP67 |
| Abmessung | 68.9 x 44.5 x 110.6 mm |
Electrical data
| DC rated operating current Ie | ≤ 0.1 mA |
| Display operating voltage | LED, Green |
| Excess gain indication | LED, red |
| Battery solution | Yes |
| Operating voltage | from 3.6 to 5.5 V |
Wireless data
| Topology | Star topology |
| Spread spectrum technology | FHSS (Frequency Hopping Spread Spectrum) |
| Device type | Node |
| Response time typical | < 250 ms |
| Function | Temperature sensor |
| Channel width | 2 MHz |
| Output power ERP | 18 dB/65 mW |
| Range | 1000000 mm |
| Installation | stationary |
| Type of radio | short-range |
| Number of radio channels | 27 |
| Single-Carrier Residence Time | 7.8 ms |
| Frequency band | 2.4-GHz ISM band |
| Frequency range | from 2402000000 to 2483000000 Hz |
| Output power EIRP | 18 dB/65 mW |
Tests/approvals
| MTTF | 67 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Approvals | cULus |
| Approvals | CE |
| Approvals | CSA |
I/O data
| Number of channels | 1/1 |
| Number of channels | 2 |
| Output type | 2-color LED indicator (red/green) |
| Input type | Temperature/humidity |
| Communication protocol | 1-wire-serial |
Other
| Number of poles | 4-polig |
| Design | Quader |
| Housing material | Kunststoff |
| Connector type | M12 |
- Lithium-ion battery, 3.6 VDC, 2400 mAh, AA, GGV UN3090/CL93017987
- Vibration & Temperature Sensor With Serial Interface For Connecting to a DX80 Radio Node3094597