Which Sensor
HomePosition SensorsInductive Sensors100000771
Turck Inductive Sensor – For the Food Industry – Image 1
Turck

Inductive Sensor – For the Food Industry

SKU: 100000771 Type: BI4U-EM12EWD-VP6X 12M
Available 3–5 business days delivery
€128.40 / pieces
€152.80 incl. VAT
Data sheet

Features

  • • Threaded barrel, M12 x 1
  • • Stainless steel, 1.4301
  • • Front cap made of liquid crystal polymer
  • • Factor 1 for all metals
  • • Resistant to magnetic fields
  • • For temperatures of -40 °C…+100 °C
  • • High protection class IP69K for harsh environments
  • • Special double-lip seal
  • • Protection against all common acidic and alkaline cleaning agents
  • • Laser engraved label, permanently legible
  • • DC 4-wire, 10…30 VDC
  • • Changeover contact, PNP output
  • • Cable connection

Electrical data

DC rated operating current Ie ≤ 200 mA
Switching frequency 3 kHz
Wire break/reverse polarity protection yes/Complete
Isolation test voltage 0.5 kV
AC field stability 300 mTSS
Voltage drop at Ie ≤ 1.8 V
Short circuit protection yes/Cyclic
Output function 4-wire, Complementary contact, PNP
DC field stability 300 mT
No-load current up to 15 mA
Residual current ≤ 0.1 mA
Ripple Uss ≤ 10 % UBmax
Operating voltage UB from 10 to 30 VDC

General data

Rated switching distance 4 mm
Secured operating distance ≤ (0.81 × Sn) mm
Temperature drift ≤ ±10 %
Temperature drift ≤ ± 20 %, ≤ ‐25 °C , ≥ +70 °C
Hysteresis 3…15 %
Repeatability ≤ 2 % of full scale
Installation conditions Flush

Ambient Conditions

Display switch state LED, Yellow
Vibration resistance 55 Hz (1 mm)
MTTF 874 years acc. to SN 29500 (Ed. 99) 40
MTTF °C
Ambient temperature from -40 to 100 °C
Shock resistance 30 g (11 ms)
Degree of protection (IP) IP69K
Degree of protection (IP) IP68

Mechanical data

Admissible pressure on front cap ≤ 20 bar
Active area material Plastic, LCP
Elektrischer Anschluss Cable
End caps Plastic, EPTR
Cable quality Ø 5.2 mm, Gray, Lif12Y33Y, TPE, 12 m
Cable quality Food safe
Connector housing PP
Design Threaded barrel, M12 x 1
Max. tightening torque of housing nut 10 Nm
Housing material Stainless steel, 1.4301 (AISI 304)
Abmessung 64 mm
100000771 (EN)
EDB_100000771_gbr_en.pdf
100000771 (DE)
EDB_100000771_ger_de.pdf
Compare