Turck
Turck
I/O Hub for Connecting Digital Signals to IO-Link Master 8 Digital PNP Outputs 0.5 A
SKU: 6814101 Type: TBIL-M1-8DOP
Available3–5 business days delivery
€163.80 / pieces
€194.92 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- IO-Link V1.1 Class A
- Glass fiber reinforced housing
- Shock and vibration tested
- Fully potted module electronics
- Protection classes IP65, IP67, IP69K
- ATEX Zone 2/22
- CCC-Ex
- 1 digital output per slot
- I&M data sets support installation and maintenance
- IO-Link diagnostics for short circuit and supply voltage
General Information
| Mounting | 4 mounting holes Ø 4.3 mm |
| MTTF | 174 years acc. to SN 29500 (Ed. 99) 20 °C |
| IO-Link | Green OFF Power off |
| IO-Link | Flashing IO-Link communication OK, |
| IO-Link | receiving valid output process data |
| IO-Link | Red ON IO-Link communication or module error |
| IO-Link | receiving no or invalid output process data or diagnosis available |
| Ambient temperature | from -40 to 70 °C |
| Dimensions (L x W x H) | 54 x 150 x 27.4 mm |
| Storage temperature | from -40 to 85 °C |
| Altitude | Max. 5000 m |
| LED | Color Status Description |
| Housing material | PA6-GF30 |
| Degree of protection (IP) | IP67 |
| Degree of protection (IP) | IP69K |
Digital outputs
| Output current per channel | 4 A total (3 A UL rating), 0.5 A per channel |
| Number of channels | 8 digital PNP outputs |
| Output voltage | 24 VDC from supply voltage |
| Simultaneity factor | 0.75 |
| Electrical isolation | outputs to FE 500 VDC |
| Output type | PNP |
| Short circuit protection | yes |
| Type of load | resistive, inductive, lamp load |
| Type of output diagnostics | Group diagnostics |
| Output connectivity | M12 |
IO-Link
| Transmission rate | COM 2 / 38.4 kbps |
| Transmission physics | corresponds to 3-wire physics (PHY2) |
| IO-Link port type | Class A |
| Frame type | 2.3 |
| Connectivity IO-Link | 1 × M12 |
| IO-Link specification | V 1.1 |
| Parameterization | IO-Link master |
Supply
| Admissible range | 18…30 VDC |
| Admissible range | V1 max. 4 A |
| Power dissipation, typical | ≤ 1.5 W |
| Sensor/actuator supply | Class-A supply from V1 |
| Sensor/actuator supply | Short circuit-proof, 120 mA per slot |
| Operating current | Max. 65 mA |
| Supply voltage | 24 VDC |
| Connection technology power supply | M12 |
Outputs LED status
| C1 A / B … C8 A / B | Green OFF Output inactive, logic 0 |
| C1 A / B … C8 A / B | ON Output active, logic 1 |
| C1 A / B … C8 A / B | Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 |
| C1 A / B … C8 A / B | MSB LSB |
| Outputs | 0 DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1 |
| Outputs | C8P4 (A) C7P4 (A) C6P4 (A) C5P4 (A) C4P4 (A) C3P4 (A) C2P4 (A) C1P4 (A) |
Standard/Directive conformity
| Shock test | Acc. to EN 60068-2-27 |
| Approvals and certificates | CEUKCAATEX Zone 2/22 |
| Approvals and certificates | CCC-Ex |
| Approvals and certificates | UV resistant acc. to DIN EN ISO 4892-2A (2013) |
| Vibration test | Acc. to EN 60068-2-6 |
| Vibration test | Acceleration up to 20 g |
| UL Certificate | cULus LISTED 21 W2, Encl.type 1 IND.CONT.EQ. |
| Drop and topple | Acc. to IEC 60068-2-31/IEC 60068-2-32 |
| Note on ATEX/IECEx | The Quick Start Guide with information on use in Ex |
| Note on ATEX/IECEx | areas must be observed. |
| Electromagnetic compatibility (EMC) | Acc. to EN 61000-6-2/-6-4 |
Power supply
| Supply voltage | 24 VDC |
Other
| Housing material | Kunststoff |