Which Sensor
HomePosition SensorsMagnetic Sensors1600620
Turck NIMFE-EM12/4.6L88-UP6X-H1141/S1182 Magnetic Field Sensor – With TIN Coating For Detection of Ferromagnetic Parts – Image 1
Turck

NIMFE-EM12/4.6L88-UP6X-H1141/S1182 Magnetic Field Sensor – With TIN Coating For Detection of Ferromagnetic Parts

SKU: 1600620 Type: NIMFE-EM12/4.6L88-UP6X-H1141/ S1182
Available 3–5 business days delivery
€307.80 / pieces
€366.28 incl. VAT
Data sheet

Features

  • • Threaded barrel, M12 x 1
  • • Stainless steel, 1.4301
  • • DC 3-wire, 10…30 VDC
  • • NC/NO parametrizable with teach adapter VB2‐SP1
  • • M12 x 1 male connector

Functional principle

The weld sensors are available in different versions, with different signal intensities and diameters. Ferromagnetic parts which differ strongly in their material properties and diameters can thus be detected. A target part has to be located within the so called sensitive area in order to be detected. The internal sensor signal reaches the maximum intensity if the sensitive area is completely covered by the target. Partial coverage is also possible. Sensitive area S = 9 mm Within this area the sensor signal changes when components are connected. Maximum range M = 13 mm In case of complete coverage of the sensitive area the maximum signal intensity is achieved.

Electrical data

DC rated operating current Ie ≤ 100 mA
Wire break/reverse polarity protection yes/Complete
Isolation test voltage 0.5 kV
Voltage drop at Ie ≤ 1 V
Short circuit protection yes/Cyclic
Output function 3-wire, Connection programmable, PNP
No-load current up to 15 mA
Residual current ≤ 0.1 mA
Ripple Uss ≤ 10 % UBmax
Operating voltage UB from 10 to 30 VDC

Ambient Conditions

Display switch state LED, Yellow
Display operating voltage LED, Green
Vibration resistance 55 Hz (1 mm)
MTTF 874 years acc. to SN 29500 (Ed. 99) 40
MTTF °C
Ambient temperature from -25 to 70 °C
Shock resistance 30 g (11 ms)
Degree of protection (IP) IP67

Mechanical data

Active area material Stainless steel, 1.4301 (AISI 304), TIN
Active area material coating
Elektrischer Anschluss Connector, M12 × 1
Design Threaded barrel, M12 x 1
Max. tightening torque of housing nut 10 Nm
Housing material Stainless steel, 1.4301 (AISI 304)
Abmessung 88 mm

Allgemein

Special version S1182 Corresponds to:TIN coating
1600620 (EN)
EDB_1600620_gbr_en.pdf
1600620 (DE)
EDB_1600620_ger_de.pdf
D101697
D101697.pdf
Compare