Turck 
Turck
Draw-Wire
SKU: 100049336 Type: DWE-1250-70-97-7A-H1151
Available 3–5 business days delivery
€880.00 / pieces
€1,047.20 incl. VAT
Features
- • Compact, highly dynamic draw-wire sensor
- • Measuring principle: magnetic
- • With permanently installed analog encoder from the REM-97 product series
- • Sensor protection class IP65
- • ‐20…+85 °C
- • 10…30 VDC
- • Analog output, 4…20 mA
- • M12 × 1 connector, 5-pin
- • Resolution: 12 bits on measuring range
- • Measuring range can be scaled via teach-in inputs
- • Start of the measuring range: U for min. 1 s B on teach 1
- • End of the measuring range: U for min. 1 s B on teach 2
Mechanical data
| min. extension force | 3.8 N |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Encoder housing material | Die-cast zinc |
| max.extension force | 5.6 N |
| Wire material | Stainless steel |
| Pull acceleration max. | 200 m/s² |
| max. extension speed | 10 m/s |
| Design | Draw Wire |
| Housing material | Titanium anodized aluminium |
Electrical data
| Wire break/reverse polarity protection | yes |
| Current output | 4…20 mA |
| DA converter resolution | 12 Bit |
| Short circuit protection | yes |
| Output function | Analog output |
| No-load current | up to 38 mA |
| Operating voltage UB | from 10 to 30 VDC |
Allgemein
| Measurement principle | Magnetic |
Ambient Conditions
| Ambient temperature | from -20 to 85 °C |
| Technische Daten | IP65 |
| Technische Daten | gs |
| Technische Daten | s when the shaft is at a standstill. |
| Technische Daten | Teach input teach 1 Teach input teach 2 LED |
| Technische Daten | (pin 4) (pin 5) |
| Technische Daten | Set start point of The green LED flashes |
| Technische Daten | measuring range once |
| Technische Daten | Set end point of The green LED flashes |
| Technische Daten | measuring range. The three times |
| Technische Daten | measuring range must |
| Technische Daten | be >21 mm. A start point |
| Technische Daten | must have been set |
| Technische Daten | beforehand. |
| Technische Daten | Reset to factory setting. Connect teach 1 and teach The LED flashes green, |
| Technische Daten | 2 to UB simultaneously. red, green |
| Technische Daten | ed, they should be set to 0 V (GND ground) to avoid faults. |
General data
| Output type | Analog |
| Measuring range | 1250 mm |
| Linearity deviation | ≤ 0.05 % |
- Deflection roller for aluminium draw- wire sensors1544753