Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

Name: Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output
Brand: Turck
SKU: 100001104
Price: 137.9 EUR
Availability: InStock

SKU: 100001104 Type: TTM-206A-CF-LIUPN-H1140-L300

Available 3–5 business days delivery

€137.90 / pieces

€164.10 incl. VAT

Data sheet

Features

• Miniature design
• Factory setting 0…150 °C
• Parameterizable via IO-Link
• Analog output 4…20 mA (2-wire)
• Switching output
• Compression fitting process connection
• Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip)

Functional principle

The TTM miniature transmitters are available with integrated probe. Due to the integrated electronics, the limited temperature range must be observed, especially in the area of the M12 connector.

Analog output

Load	≤ [(V – 10 V)/21 mA] kΩ
Load	supply
Current output	4…20 mA
Repeatability	0.1 % of full scale applies to temperatures > +300 °C
Repeatability	0.1 K
Note	Connection to PIN 1+2
Accuracy	± 0.3 K

Reference conditions acc. to IEC 61298-1

Auxiliary power	24 VDC
Humidity	from 45 to 75 %
Atmospheric pressure	from 860 to 1060 hPa
Temperatur (-)	15…+25 °C

Programming FDT / DTM

Transmission rate	COM 2 / 38.4 kbps
Transmission physics	corresponds to 3-wire physics (PHY2)
Frame type	2.2
Process data width	16 bit
Included in the SIDI GSDML	Yes
Switchpoint information	1 bit
Measured value information	15 bit
Accuracy	± 0.2 K

Power supply

Short-Circuit/Reverse Polarity Protection	IP67
Voltage drop at Ie	yes / yes
Electricity consumption	up to 20 mA
Operating voltage	from 18 to 32 V
Operating voltage UB	from 8 to 32 VDC
Degree of protection (IP)	IP67
Electrical safety class	III

Temperature behaviour

Temperature coefficient zero point TK0	± 0.1 % of full scale/10 K
Temperature coefficient range TKs	± 0.1 % of full scale/10 K

Tests/approvals

MTTF	541 years acc. to SN 29500 (Ed. 99) 40
MTTF	°C

Mechanical data

Sensor material	Stainless steel, 1.4404 (AISI 316L)
Elektrischer Anschluss	Connector, M12 × 1
Pressure resistance	100 bar
Process connection	For compression fittings, thermowell or
Process connection	direct mounting
Housing material	Stainless-steel/Plastic, 1.4404 (AISI
Housing material	316L)

Switching outputs

Switching point accuracy	± 0.3 K
Release position	-210…+640 °C
Switching point	-200…+650 °C
Switching cycles	≥ 100 mil.
Output function	NO/NC programmable, PNP/NPN
Note	Connection to PIN 1+3+4. Please use
Note	a 3-wire cable for operation on a Turck
Note	TBEN IO-Link master.
Communication protocol	IO-Link
Rated operating current	0.15 A

Temperature range

Outer diameter	6 mm
Immersion depth L	300 mm
Note	Max. temperature of electronics:
Note	80 °C/176 °F
Factory setting	0…150 °C
Factory setting	32…302 °F
Accuracy	±0.15 K + 0.002 ∙ \|t\| (-30…300 °C)
Measuring range	-50…350 °C
Measuring range	-58…662 °F
Messelement (nach DIN IEC 751)	Pt100, DIN EN 60751, class A
Ansprechzeit (bei ruhender Luft)	t₀₅ = 1.5 s / t₀₉ = 6.0 s in water @ 0.2 m/s