Turck 
Turck
Managed Ethernet Switch 8 × 100-Mbit Ports, 2 × 1-Gbit Ports
SKU: 100004426 Type: TBEN-L4-SE-M2
Available 3–5 business days delivery
€749.00 / pieces
€891.31 incl. VAT
Features
- • PROFINET device, EtherNet/IP device or Modbus TCP server
- • 2 × M12, 8-pin, X-coded, 1 Gbps highspeed backbone
- • 8 × M12, 4-pin, D-coded, 100 Mbps
- • Glass fiber reinforced housing
- • Shock and vibration tested
- • Fully potted module electronics
- • Protection classes IP65, IP67, IP69K
- • 7/8″ male connector for power supply, 4pin
- • Galvanically isolated voltage groups
- • ATEX zone 2/22
- • CCC-Ex
- • Web-based management
- • Firewall
- • Configurable LAN/WAN zones
- • NAT routing
- • VLAN according to IEEE 802.1q
- • Prioritization according to IEEE 802.1p
- • DHCP server/client
- • Port-based IP address assignment
- • IGMP (snooping/querier)
- • Media redundancy RSTP
- • HTTP, HTTPS, LLDP, NTP, SNMP V1–V3
- • Port mirroring
Switch interface
| 10/100/1000-Mbit ports | 2 |
| Flow control (802.3X) | Yes |
| Cable test | Yes |
| 10/100-Mbit ports | 8 |
| Auto-negotiation (802.3) | Yes |
| 802.3u compliance | Yes |
| 802.3q compliance | Yes |
| Multiple queues per port | Yes, max. 8 |
| 802.3x compliance | Yes |
| 802.3ab compliance | Yes |
| Jumbo frames | Yes, up to 10,240 bytes |
| QoS port prioritization (802.1D/p) | Yes |
| Auto-crossing (802.3) | Yes |
| Auto-polarity (802.3) | Yes |
EtherNet/IP™
| Class 3 connections (TCP) | 3 TCP |
| Addressing | acc. to EtherNet/IP specification |
| Configuration Assembly Instance | 106 |
| Quick Connect (QC) | < 150 ms |
| Output Assembly Instance | 102 |
| Input Assembly Instance | 101 |
| min. RPI | 2 ms |
| Class 1 connections (CIP) | 10 CIP |
General Information
| Mounting | 2 mounting holes 6.3 mm |
| MTTF | 82 years acc. to SN 29500 (Ed. 99) 20 °C |
| Halogen free | yes |
| L/A | Green On Ethernet connection established |
| L/A | 100 Mbps (XF1…XF10) or |
| L/A | 1000 Mbps (XF9 and XF10) |
| L/A | Flashing Ethernet communication |
| L/A | 100 Mbps or 1000 Mbps |
| L/A | Yellow On Ethernet link (10 Mbps) |
| L/A | Flashing Ethernet communication (10 Mbps) |
| L/A | Off No Ethernet connection |
| Ambient temperature | from -40 to 70 °C |
| Connector material | Nickel-plated brass |
| Material screw | 303 stainless steel |
| Dimensions (L x W x H) | 60.4 x 230.4 x 38.8 mm |
| Housing colour | Black |
| Storage temperature | from -40 to 85 °C |
| PWR | Green On V supply voltage OK |
| PWR | 1 |
| PWR | Off V supply voltage off or below defined tolerance of 18 V |
| Window material | Lexan |
| Altitude | Max. 5000 m |
| LED | Color Status Description |
| Housing material | PA6-GF30 |
| Material label | Polycarbonate |
| RUN | Green Flashing (1 Hz) USB host function is activated |
| RUN | Flashing (0.5 Hz) No USB host function active |
| Degree of protection (IP) | IP67 |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP65 |
System data
| Web server | Default: 192.168.1.254 |
| Connection technology Ethernet | 2 × M12, 8-pin, X-coded |
| Connection technology Ethernet | 8 × M12, 4-pin, D-coded |
| Transmission rate Ethernet | 10/100/1000 Mbps |
| Frame forwarding | store and forward |
Switch management
| DHCP client | Yes |
| DHCP option 82 | Yes |
| SNMP v2 | Yes |
| SNMP v3 | Yes |
| SNMP v1 | Yes |
| DHCP server | Yes |
| SNMP traps | Yes |
| Web server firmware update | Yes |
| HTTP web server | Yes |
| USB firmware update | Yes |
PROFINET
| Version | 2.35 |
| Addressing | DCP |
| Diagnostics | acc. to PROFINET alarm handling |
| Network load class | 3 |
| Topology detection | supported |
| MinCycleTime | 128 ms |
| Automatic addressing | supported |
| System redundancy | S2 |
| Media Redundancy Protocol (MRP) | supported |
| Conformance class | B (RT) |
Modbus TCP
| Addressing | Static IP, DHCP |
| Number of TCP connections | 8 |
| Supported function codes | FC1, FC2, FC3, FC4, FC5, FC6, FC15, FC16, FC23 |
| Output register start address | 2048 (0x0800 hex) |
| Input register start address | 0 (0x0000 hex) |
Supply
| Power dissipation, typical | ≤ 4.5 W |
| Admissible range | 8…30 VDCLoad dump protection at 12 V |
| Electrical isolation | galvanic isolation of the voltage groups V1 and V2, |
| Electrical isolation | voltages up to 500 VAC |
| Supply voltage | 24 VDC |
| Connection technology power supply | 7/8″, 4-pin |
Switch redundancy
| MSTP (802.1s) | Yes |
| RSTP (802.1w) | Yes |
Switch protocols
| IGMP | Yes |
| NTP Relay | Yes |
| PTP (IEEE1588) | Yes |
| LLDP | Yes |
Switch routing
| NAT, VLAN based | Yes, max. 32 |
| VLAN, port based | Yes |
| NAT | Yes |
| VLAN, multiple VLAN | Yes, max. 50 |
| IPv4 routing static | Yes |
| NAT PAT | Yes |
Switch port mirroring
| Port mirroring N:1 | Yes, max. 9 |
| Port mirroring 1:1 | Yes |
Switch advanced diagnostics
| PROFINET DHC (Data Hold Counter) | Yes |
| Duplexity | Yes |
| Frame errors | Yes |
| Link speed | Yes |
| Netload diagnostics | Yes |
Switch security
| Firewall | Yes |
| Broadcast storm protection | Yes |
Standard/Directive conformity
| Shock test | acc. to EN 60068-2-27 |
| Approvals and certificates | CEUKCAATEX zone 2/22 |
| Approvals and certificates | CCC-Ex |
| Approvals and certificates | UV resistant acc. to DIN EN ISO 4892-2A (2013) |
| Vibration test | Acc. to EN 60068-2-6 |
| Vibration test | Acceleration up to 20 g |
| UL Certificate | cULus LISTED 21 W2, Encl.type 1 IND.CONT.EQ. |
| Drop and topple | acc. to EN 60068-2-31/IEC 60068-2-32 |
| Note on ATEX/IECEx | The Quick Start Guide with information on use in Ex |
| Note on ATEX/IECEx | areas must be observed. |
| Electromagnetic compatibility (EMC) | Acc. to EN 61131-2 |
Power supply
| Supply voltage | 24 VDC |