Which Sensor
HomePosition SensorsCylinder Sensors46200
Turck Magnetic Field Sensor – For Pneumatic Cylinders – Image 1
Turck

Magnetic Field Sensor – For Pneumatic Cylinders

SKU: 46200 Type: BIM-IKT-AP6X
Available 3–5 business days delivery
€55.30 / pieces
€65.81 incl. VAT
Data sheet

Features

  • • Rectangular, height 17 mm
  • • Metal, GD-Zn
  • • Magnetic-inductive sensor
  • • DC 3‐wire, 10…30 VDC
  • • NO contact, PNP output
  • • Cable connection

Functional principle

Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder.

Electrical data

DC rated operating current Ie ≤ 200 mA
Switching frequency 1 kHz
Wire break/reverse polarity protection yes/Complete
Isolation test voltage 0.5 kV
Voltage drop at Ie ≤ 1.8 V
Short circuit protection yes/Cyclic
Output function 3-wire, NO contact, PNP
No-load current up to 15 mA
Residual current ≤ 0.1 mA
Ripple Uss ≤ 10 % UBmax
Operating voltage UB from 10 to 30 VDC

Mounting on the following profiles

Display switch state LED, Yellow
Cylinder design F # #

Mechanical data

Active area material Plastic, PA12-GF30
Elektrischer Anschluss Cable
Cable quality Ø 5.2 mm, LifYY, PVC, 2 m
Design Rectangular, IKT
Housing material Metal, GD-Zn
Abmessung 30 x 14.6 x 17 mm

Ambient Conditions

Vibration resistance 55 Hz (1 mm)
MTTF 2283 years acc. to SN 29500 (Ed. 99) 40
MTTF °C
Ambient temperature from -25 to 70 °C
Shock resistance 30 g (11 ms)
Degree of protection (IP) IP67

General data

Temperature drift ≤ 0.1 mm
Overrun Speed ≤ 10 m/s
Hysteresis ≤ 1 mm
Repeatability ≤ ± 0.1 mm
46200 (DE)
EDB_46200_ger_de.pdf
46200 (EN)
EDB_46200_gbr_en.pdf
Compare