HomeProcess SensorsPressure SensorsDW35311F
IPFPressure sensor, Ø38mm 122lang, 0-50bar, 12-32V DC, G1/4 "A, 2x PNP NC/NO, 0-10V / 0/4-20mA, M12 plug connector 4-pin, IP65, PA 6.6 (plastic), With display – Image 1
IPF

Pressure sensor, Ø38mm 122lang, 0-50bar, 12-32V DC, G1/4 "A, 2x PNP NC/NO, 0-10V / 0/4-20mA, M12 plug connector 4-pin, IP65, PA 6.6 (plastic), With display

SKU: DW35311F
Available3–5 business days delivery
€351.00 / pieces
€417.69 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet(DE)

Features

  • Pressure sensors are suitable for measuring various media with high accuracy. They are available with switching output and/ or analog output. Depending on the device type, the measured values can be recorded using PC software. These sensors are used in all areas e.g. pneumatic and hydraulic applications.

Other features

Measurement displayRelative
Suitable forFlüssige Medien
ApplicationHydraulic applications | Pneumatic applications | Zweipunktreglung
FunctionalitySpitzenwertspeicher

Mechanical features

Maximum overload pressure75 bar
Bursting pressure900 bar
Material of measuring cellStainless steel 1.4435
Material of process connectionStainless steel 1.4435
Nominal pressure50 bar
Ambient temperaturefrom -20 to 80 °C
Process connectionG1/4 inch A
Thread length14 mm
Length122 mm
Thread pitch1.34 mm
Housing materialPA 6.6 (synthetic)
Material of measuring transducerStainless steel 1.4435
Medium temperaturefrom -20 to 80 °C
DesignCylinder plain
Diameter38 mm
Degree of protection (IP)IP65
AbmessungØ38mm, 122mm long

Electrical features

Pressure rangefrom 0 to 50 bar
Standby delay2000 ms
Measurement methodAbsolute
Relative hysteresis1 %
Switching frequency125 Hz
Customizable output functionsWindow function | Switching point | Hysteresis
Elektrischer AnschlussConnector M12
Elektrischer AnschlussM12 4-pin plug connector
Setting procedureParameterization
Setting procedureApplication software
Number of poles4
Type of analogy output4…20 mA
Type of analogy output0…10 V
Type of analogy output0 - 20mA
Initial settingfrom 0 to 10000 hPa
Type of switching outputPNP
Type of switch functionNormally closed contact/normally open contact
Fall time5 ms
Voltage drop2 V
Response time5 ms
Suitable as limiterYes
Suitable as guardYes
Number of switching outputs2
IndicationLED display
No-load current60 mA
Relative linearity deflection0.25 %
Damping (analog output)20 s
Switch-on delay0 - 20 s
Switch-off delay0 - 20 s
Protection functionsReverse polarity protection | Short circuit protection
Design of alarm outputPNP
Operating voltage (DC)12 - 32 V
Relative repeat accuracy0.1 %
Rated switch current250 mA
Operating voltagefrom 12 to 32 V
End settingfrom 40000 to 50000 hPa

More

IPF Product Group360 pressure sensors
packaging dimensions160 x 99 x 60 mm
POP-compliantYes
Customs tariff number90262020
WEEE number40951076
Reach-compliantYes
OzDS-compliantYes
RoHS‑compliantYes
gross weight370 g

Installation / Disposal

DisposalWEEE number according to § 6 para. 3 ElektroG: 40951076
InstallationMounting / installation may only be carried out by a qualified electrician!

Classification

ETIM 8EC000243 Pressure switch

Other

Process connectionG1/4
Number of poles4-polig
DesignZylinder
Connector typeM12
Switching outputPNP

Safety warnings

  • Before initial operation, please make sure to follow all safety instructions that may be provided in the product information.
  • Never use these devices in applications where the safety of a person depends on their functionality.
  • Any software, drivers or IODD files that may be required to operate your device can be downloaded free of charge from our homepage: www.ipf-electronic.com