Pressure Transmitter – With Current Output (2-Wire)
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Fully welded metal measuring cell
- Pressure range 0…1000 bar rel.
- Pressure peak orifice
- Metal measuring cell welded without seals
- 7…33 VDC
- Analog output 4…20 mA
- Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring
- Connector device, DIN EN 175301-803-A
Functional principle
The pressure sensors in the PT…‐2000 product series operate with a fully welded metal measuring cell in various pressure ranges of up to -1…1000 bar in 2-, 3- or even 4-wire technology. Depending on the sensor variant, the processed signal is available as an analog output signal (4…20 mA, 0… 10 V, 0…5 V, 1…6 V, ratiometric) or as a digital IO-Link process parameter. The IO-Link sensor variants also have two independently configurable switching outputs. In addition to the standard variants, there are special sensors for uses such as ATEX areas or for oxygen applications. A wide range of process connections and electrical connections offer a high degree of flexibility in a wide range of applications.
Mechanical data
| Material pressure transducer | Stainless steel 1.4435 (AISI 316L) |
| Elektrischer Anschluss | Connector, DIN EN 175301-803 Form A |
| Process connection | G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring |
| Pressure connection material | Stainless steel 1.4404 (AISI 316L) |
| Max. tightening torque of housing nut | 20 Nm |
| Housing material | Stainless-steel/Plastic, 1.4404 (AISI |
| Housing material | 316L)/polyarylamide 50 % GF UL 94 V-0 |
Allgemein
| Pressure range | from 0 to 1000 bar |
| Pressure type | Relative pressure |
| Response time | up to 2 ms |
| Bursting pressure | from 2500 bar |
| Long-term stability | 0.25 % FS, according to IEC EN 60770-1 |
| Admissible overpressure | up to 1500 bar |
Analog output
| Load | ≤ (supply voltage -7)/20 kΩ |
| Current output | 4…20 mA |
| Accuracy LHR | ±0.3 % FS (typical; max. ±0.5 % FS) |
| Resolution | <± 0.1 % FS |
Reference conditions acc. to IEC 61298-1
| Auxiliary power | 24 VDC |
| Humidity | from 45 to 75 % |
| Atmospheric pressure | from 860 to 1060 hPa |
| Temperatur (-) | 15…+25 °C |
Power supply
| Short-Circuit/Reverse Polarity Protection | yes / yes |
| Insulation voltage | 750 VDC |
| Electricity consumption | up to 23 mA |
| Operating voltage | from 7 to 33 V |
| Degree of protection (IP) | IP65 |
| Electrical safety class | III |
Ambient Conditions
| Vibration resistance | 20 g, 15…2000 Hz, 15…25 Hz with amplitude ± 15 mm, 1 octave/minute in all 3 |
| Vibration resistance | directions, 50 continuous loads, acc. to |
| Vibration resistance | IEC 68-2-6 |
| Ambient temperature | from -30 to 85 °C |
| Storage temperature | from -50 to 100 °C |
| Shock resistance | 100 g, 11 ms, half sinusoidal curve, all |
| Shock resistance | 6 directions, free fall from 1 m onto concrete (6x) acc. to IEC 68-2-27 |
Tests/approvals
| MTTF | 1189 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Included in delivery | FKM special profile seal (1x) |
| UL registration number | E302799 |
| Approvals | cULus |
Temperature behaviour
| Temperature coefficient (zero point) | ± 0.2 % of full scale/10 K |
| Medium temperature | from -40 to 135 °C |
Output
| Output function | Analog output current |
| Output 1 | Analog output |
Other
| Process connection | G1/4 Außengewinde |
| Housing material | Edelstahl |
| Housing material | Kunststoff |
| Analog output | 4…20 mA |
| Connector type | DIN/Ventilstecker |
