Turck 
Turck
Flow Sensor
SKU: 100001008 Type: FS100-300L-04-2UPN8-H1141
Available 3–5 business days delivery
€340.50 / pieces
€405.20 incl. VAT
Features
- • Screw-in adaptor with process connection G1/4" male thread included in delivery
- • Sensor housing material 1.4404 (316L)
- • Medium contact material 1.4571 (316Ti)
- • Immersion depth 16.9 mm
- • Process value display with bar graph
- • Flow monitoring for liquid media
- • Protection classes IP66, IP67 and IP69K
- • Adjustment of flow speed via teach function
- • 10…33 VDC
- • NO/NC contact, PNP/NPN output, IO-Link
- • Connector, M12 × 1
Functional principle
The flow sensor functions according to the calorimetric principle. The distinctive feature of this principle is that the flow rate correlates directly to the thermal loss of energy in the probe. The increased loss of energy is therefore a direct measure of an increased flow rate.
LED display
| Flow | Yellow On NO: Flow switchpoint exceeded (output "high") |
| Flow | NC: Flow below minimum switchpoint (output "high") |
| Flow | Off NO: Flow below minimum switchpoint (output "low") |
| Flow | NC: Flow switchpoint exceeded (output "low") |
| Flow | Flashing Teach mode/display of diagnostic data |
| Flow | (see manual for specification) |
| Temp | Yellow On NO: Temperature switchpoint exceeded (output "high") |
| Temp | NC: Temperature below minimum switchpoint (output "high") |
| Temp | Off NO: Temperature below minimum switchpoint (output "low") |
| Temp | NC: Temperature switchpoint exceeded (output "low") |
| Temp | Flashing Teach mode/display of diagnostic data |
| Temp | (see manual for specification) |
| IO-Link proc | ess data image |
| For detailed | description of the display patterns and flashing codes, see manual D10000208 |
| PWR | Green On Operating voltage applied |
| PWR | Device is operational |
| PWR | Flashing Operating voltage applied |
| PWR | IO-Link communication active |
| PWR | (inverted flash with T on 900 ms and T off 100 ms) |
| LED | Color Status Description |
Flow Monitoring
| Reproducibility +/- | 1…30 cm/s; for water 3…300 cm/s |
| Reproducibility +/- | 0.2…5 cm/s ; for water 3…100 cm/s; |
| Reproducibility +/- | 10…80 °C |
| Switching point accuracy | Directed inflow to punch mark ±20 ° |
| Temperature drift | 0.5 cm/s x 1/K |
| Standard flow range | 3…300 cm/s |
| Standard flow range | Any axial alignment of the sensor rod in |
| Standard flow range | the medium |
| Hysteresis | ≤ 300 K/min |
| Hysteresis | 3 … 25 % of the switching point |
| Extended flow range | 1…300 cm/s |
| Temperature gradient | 0.5 cm/s × 1/K |
| Response time T09 | 6 s |
Temperature monitoring
| Reproducibility +/- | ≤ 0.5 K |
| Reproducibility +/- | 12 s |
| Switching point accuracy | ± 2 K; for water >3 cm/s |
| Resolution | 0.5 K |
| Measuring range | -25…85 °C |
| Response time T09 | 3 s |
Application range
| Bar length (L1) | 45 mm |
| Pressure resistance | 300 bar |
| Application range | liquids |
| Installation conditions | Immersion sensor |
Electrical data
| Standby delay time | 18…30 s |
| Short-Circuit/Reverse Polarity Protection | yes, cyclic / yes (voltage supply) |
| Voltage drop | ≤ 1.8 VDC |
| Overload protection | Yes |
| Operating voltage UB | from 10 to 33 VDC |
| Power consumption | up to 1.6 VA |
| Electrical safety class | III |
Ambient Conditions
| Vibration resistance | 20 g (55…2000 Hz) |
| Ambient temperature | from -40 to 80 °C |
| Storage temperature | from -40 to 80 °C |
| Shock resistance | 50 g (11 ms) DIN EN 60068-2-27 |
Tests/approvals
| MTTF | 120 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Indication | LED display functions for status of supply |
| Indication | voltage, switching states and teach processes. Process indicators via bar graph. |
| UL registration number | E516036 |
| Approvals | cULus |
| Approvals | CE |
IO-Link
| IO-Link port type | Class A |
| Frame type | 2.2 |
| Included in the SIDI GSDML | Yes |
| IO-Link specification | V 1.1 |
Mechanical data
| Elektrischer Anschluss | Connector, M12 × 1 |
| Adapter material | Stainless steel 1.4571 (316Ti) |
| Process connection | G 1/4'' male thread |
| Materials (media-contacting) | Stainless steel 1.4571 (AISI 316Ti), FKMO-ring, AFM flat seal |
| Process connection adapter | M18 × 1.5 male thread; G 1/4'' male |
| Process connection adapter | thread |
| Housing material | Stainless-steel/Plastic, 1.4404 (AISI |
| Housing material | 316L)/Grilamid TR90 UV/Elastollan C 65 |
| Housing material | A 15 HPM 000/Ultramid A3X2G5 |
| Electromagnetic compatibility (EMC) | DIN EN 60947-5-9: 2007 |
| Process connection sensor | M18 x 1.5 female thread |
| Degree of protection (IP) | IP67 |
| Degree of protection (IP) | IP66 |
| Degree of protection (IP) | IP69K |
Output
| Output function | NO/NC programmable, PNP/NPN |
| Output 1 | Flow: Switching output or IO-Link |
| Output 2 | Temperature: Switching output |
| Communication protocol | IO-Link |
Allgemein
| Medium temperature | from -25 to 85 °C |
Programming
| Programming options | Automatic switching logic recognition, |
| Programming options | easy switching pointadjustment via touchpads |
-
Accessories Screw-In Adapter For Immersion Flow Sensors FS/FP100001987 -
Accessories Screw-In Adapter For Immersion Flow Sensors FS/FP100001989 - Accessories Screw-In Adapter For Immersion Flow Sensors FS/FP100001988
-
Accessories Screw-In Adapter For Immersion Flow Sensors FS/FP100001990 - Screw-in adapter for immersion sensors from the series FS.. , FP..; material: Stainless steel 1.4571 (316Ti); process connection: G3/4"100001991
- Actuator and Sensor Cable, PVC – Connection Cable6625025
-
Actuator and Sensor Cable, PVC – Connection Cable6625013