in.hub
in.hub
HUB-EN200
SKU: HUB-EN200 Type: A5000022
Available3–5 business days delivery
€455.00 / pieces
€541.45 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteData
| Memory | 1 GB DDR3L RAM, 8 GB eMMC |
| Voltage and current measurement | 1~ or 3~, max. 230 V / 400 V, 50 or 60 Hz, max. 4× AC current sensors, sampling rate up to 8 kHz and 16 bit, resolution of current and voltage measurement |
| Protocols | OPC UA server + client |
| Protocols | MQTT broker client + server |
| Protocols | Modbus TCP/IP broker client + server |
| Max. power consumption | 5 W |
| Housing | Plastic (polyamide), black, flammability class UL 94 V0 |
| Data interfaces | USB1: Host (Micro USB) |
| Data interfaces | USB2: Device (USB-A) |
| Data interfaces | Ethernet: 100 Mbit/s |
| Data interfaces | 3× status LEDs |
| Data interfaces | Backplane bus |
| Dimensions (L x W x H) | 139 mm × 100 mm × 25 mm |
| Current supply | 24 V DC ± 10 % |
| Weight | 150 g |
| Operating System | SIINEOS IIoT operating system for configuration and data visualization |
| Processor | NXP® i.MX 6ULL |
| Degree of protection (IP) | IP20 |
Current measurement (CT1 and CT2)
| Internal measuring resistance | 6 Ohm |
| Bandwidth | 1 … 2000 Hz |
| Resolution | 16 bit |
| Maximum current of inputs CT1 and CT2 | 117 mA eff. |
| Circuit diagram | CT1 and CT2 are identical except for the pin designation. The CT1 interface can be seen here as an example. |
| Sampling frequency | 8 kHz |
SIINEOS
| Pre-installed software | FlexPlorer: Live data visualization |
| Pre-installed software | Azure IoT Hub Connector: Connector to the Microsoft® IoT platform |
| Pre-installed software | Cloud of Things Connector: Connector to the Telekom® IoT platform |
| Pre-installed software | InGraf: Grafana data visualization |
| Pre-installed software | NumCorder: Recording of scanned or entered barcodes / serial numbers |
| Pre-installed software | OPC UA server: Counterpart to the OPC UA client, setting up of a server–client structure with one device |
| Pre-installed software | NodeRED: Graphical programming of interfaces, services or hardware |
| Pre-installed software | PromEx: Database configuration of VictoriaMetrics and Prometheus |
| Pre-installed software | TOSIBOX®: Secure connectivity between the IoT devices |
| Pre-installed software | SIGNL4: Forwarding of alarms to the SIGNL4 cloud |
Storage
| Storage | Up to 7 GB usable |
| Data export | VictoriaMetrics |
| Recording interval | Minimum 1 second |
Backplane bus
| Communication | Modbus RTU |
| Voltage on the backplane bus | Voltage of the power supply unit minus 0.5 V |
| Voltage on the backplane bus | Switchable in the signals of the master gateway |
Ambient Conditions
| Humidity | Storage: 10% to 95% RH, non-condensing |
| Humidity | Operation: 20% to 90% RH, non-condensing |
| Operating altitude | Max. 2,000 m above sea level |
| Temperature range | Storage: –40°C to 85°C |
| Temperature range | Operation: 0°C to 50°C |
Voltage measurement (voltage)
| Permitted connections | Single-phase (L) or 3-phase (L1, L2, L3) with neutral conductor (N) |
| Overvoltage category | 300 V CAT III |
USB connections
| Support for | Full, high and low speed (480, 12 and 1.5 Mbit/s) |