Turck
Turck
Inductive Sensor – For the Food Industry
SKU: 100000617 Type: BI15U-EM30WD-VP6X-H1141
Available3–5 business days delivery
€114.90 / pieces
€136.73 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Threaded barrel, M30 x 1.5
- Stainless steel, 1.4404
- Front cap made of liquid crystal polymer
- Factor 1 for all metals
- Resistant to magnetic fields
- For temperatures of -40 °C…+100 °C
- High protection class IP69K for harsh environments
- Special double-lip seal
- Protection against all common acidic and alkaline cleaning agents
- Laser engraved label, permanently legible
- DC 4-wire, 10…30 VDC
- Changeover contact, PNP output
- M12 x 1 male connector
Functional principle
The inductive sensors for the food industry are absolutely tight and resistant to cleaning agents and disinfectants,thanks to the LCP front cap and the stainless steel housing.
Electrical data
| DC rated operating current Ie | ≤ 200 mA |
| Switching frequency | 0.75 kHz |
| Wire break/reverse polarity protection | yes/Complete |
| Isolation test voltage | 0.5 kV |
| AC field stability | 300 mTSS |
| Voltage drop at Ie | ≤ 1.8 V |
| Short circuit protection | yes/Cyclic |
| Output function | 4-wire, Complementary contact, PNP |
| DC field stability | 300 mT |
| No-load current | up to 25 mA |
| Residual current | ≤ 0.1 mA |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage | from 10 to 30 V |
General data
| Rated switching distance | 15 mm |
| Secured operating distance | ≤ (0.81 × Sn) mm |
| Temperature drift | ≤ ±10 % |
| Temperature drift | ≤ ± 20 %, ≤ ‐25 °C , ≥ +70 °C |
| Hysteresis | 3…15 % |
| Repeatability | ≤ 2 % of full scale |
| Installation conditions | Flush |
Ambient Conditions
| Display switch state | LED, Yellow |
| Vibration resistance | 55 Hz (1 mm) |
| MTTF | 874 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -40 to 100 °C |
| Shock resistance | 30 g (11 ms) |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP68 |
Mechanical data
| Admissible pressure on front cap | ≤ 10 bar |
| Active area material | Plastic, LCP |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Connector housing | plastic, PP |
| Design | Threaded barrel, M30 x 1.5 |
| Max. tightening torque of housing nut | 75 Nm |
| Housing material | Stainless steel, 1.4404 (AISI 316L) |
| Abmessung | 62 mm |
Other
| Design | Gewinderohr |
| Housing material | Edelstahl |
| Connector type | M12 |
| Switching output | Schließer/Öffner |
| Switching output | PNP |
