Which Sensor
HomePosition SensorsInductive Sensors100000634
Turck Inductive Sensor – For the food industry – Image 1
Turck

Inductive Sensor – For the food industry

SKU: 100000634 Type: NI10U-EM12EWD-VP6X-H1141
Available 3–5 business days delivery
€95.50 / pieces
€113.65 incl. VAT
Data sheet

Features

  • • Threaded barrel, M12 x 1
  • • Stainless steel, 1.4404
  • • Front cap made of liquid crystal polymer
  • • Factor 1 for all metals
  • • Resistant to magnetic fields
  • • For temperatures of -40 °C…+100 °C
  • • High protection class IP69K for harsh environments
  • • Special double-lip seal
  • • Protection against all common acidic and alkaline cleaning agents
  • • Laser engraved label, permanently legible
  • • DC 4-wire, 10…30 VDC
  • • Changeover contact, PNP output
  • • M12 x 1 male connector

Functional principle

The inductive sensors for the food industry are absolutely tight and resistant to cleaning agents and disinfectants. The requirements of the protection classes IP68 and IP69K are well exceeded by our uprox®+ sensors. The sensors are entirely protected by the LCP front cap and the stainless steel housing.

Electrical data

DC rated operating current Ie ≤ 200 mA
Switching frequency 1 kHz
Wire break/reverse polarity protection yes/Complete
Isolation test voltage 0.5 kV
AC field stability 300 mTSS
Voltage drop at Ie ≤ 1.8 V
Short circuit protection yes/Cyclic
Output function 4-wire, Complementary contact, PNP
DC field stability 300 mT
No-load current up to 25 mA
Residual current ≤ 0.1 mA
Ripple Uss ≤ 10 % UBmax
Operating voltage UB from 10 to 30 VDC
Electrical safety class III

General data

Rated switching distance 10 mm
Secured operating distance ≤ (0.81 × Sn) mm
Temperature drift ≤ ±10 %
Temperature drift ≤ ± 20 %, ≤ ‐25 °C , ≥ +70 °C
Hysteresis 3…15 %
Repeatability ≤ 2 % of full scale
Installation conditions Non-flush

Ambient Conditions

Display switch state LED, Yellow
Vibration resistance 55 Hz (1 mm)
MTTF 874 years acc. to SN 29500 (Ed. 99) 40
MTTF °C
Ambient temperature from -40 to 100 °C
Shock resistance 30 g (11 ms)
Degree of protection (IP) IP69K
Degree of protection (IP) IP68

Mechanical data

Admissible pressure on front cap ≤ 20 bar
Active area material Plastic, LCP
Elektrischer Anschluss Connector, M12 × 1
Connector housing plastic, PP
Design Threaded barrel, M12 x 1
Max. tightening torque of housing nut 10 Nm
Housing material Stainless steel, 1.4404 (AISI 316L)
Abmessung 62 mm
100000634 (EN)
EDB_100000634_gbr_en.pdf
100000634 (DE)
EDB_100000634_ger_de.pdf
Compare