Which Sensor
HomeMotion ControlIncremental Encoders100010243
TurckIncremental Encoder Industrial Line – Image 1
Turck

Incremental Encoder Industrial Line

SKU: 100010243 Type: REI-10SA1C-2B360-H1181
Available3–5 business days delivery
€288.00 / pieces
€342.72 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • Clamping flange, Ø 58 mm
  • Solid shaft, Ø 3/8" × 5/8"
  • Optical measuring principle
  • Shaft material: stainless steel
  • Protection class IP67 on housing and shaft side
  • ‐40…+85 °C
  • Max. 6000 rpm (continuous operation 3000 rpm)
  • 10…30 VDC
  • Push-pull/HTL invertible
  • Pulse frequency max. 300 kHz
  • M12 × 1 male connector, 8-pin
  • 360 pulses per revolution

General data

Moment of inertia of the rotor1.8 × 10-6 kgm²
Max. rotational speed6000 U/min
Incremental resolution360 ppr
Output typeIncremental
Starting torque< 0.05 Nm

Mechanical data

Axial shaft load50 N
Shaft typeSolid shaft
Shaft diameter D9525 mm
Shaft diameter D375 in
Shaft materialStainless steel
Elektrischer AnschlussConnector, M12 × 1
Elektrischer Anschluss8-pin
Shaft Length L [mm]15.875
Radial shaft load100 N
Flange typeClamping flange
Shaft length X0.625 in
Housing materialDie-cast zinc
Flange diameterØ 58 mm

Electrical data

Wire break/reverse polarity protectionyes
Signal level lowmax. 0.5 V
Signal level highmin. U - 1 VB
Pulse frequency max.300 kHz
Short circuit protectionyes
Output functionPush-Pull/HTL, invertable
Output currentup to 30 mA
No-load currentup to 100 mA
Operating voltagefrom 10 to 30 V

Ambient Conditions

Protection class shaftIP67
Vibration resistance300 m/s², 10…2000 Hz
Ambient temperaturefrom -40 to 85 °C
Shock resistance3000 m/s², 6 ms
Degree of protection (IP)IP67

Allgemein

Measurement principleOptical

Other

Number of poles8-polig
Housing materialMetall
Connector typeM12
100010243(DE)
EDB_100010243_ger_de.pdf
100010243(EN)
EDB_100010243_gbr_en.pdf
100008450
100008450.pdf
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 63.5 mm; 3 mm thick
    1544631
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 80 mm; 4 mm thick
    1544642
  • Euro flange – aluminium flange adapter for solid shaft encoders, Ø 115 mm; reference diameter 100 mm; adapts 58 mm clamping flange to Euro flange
    1544633
  • Aluminium flange adapter for solid shaft encoders, Ø 65 mm; adapts to Ø 65 mm flange and 48 mm reference diameter
    1544636
  • Aluminium angle flange for solid shaft encoders with Ø 58 mm clamping flange
    1544638
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 70 mm; 10 mm thick
    1544641
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 58 mm; 4 mm thick
    1544630
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 58 mm; adapts clamping flange to synchro flange
    1544635
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 70 mm; thickness 4 mm, adapts to Ø 70 mm flange
    1544637
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 70 mm; thickness 10 mm, adapts to Ø 70 mm flange
    1544640
Compare