Which Sensor
HomeMotion ControlIncremental Encoders100010243
Turck Incremental Encoder Industrial Line – Image 1
Turck

Incremental Encoder Industrial Line

SKU: 100010243 Type: REI-10SA1C-2B360-H1181
Available 3–5 business days delivery
€288.00 / pieces
€342.72 incl. VAT
Data sheet

Features

  • • Clamping flange, Ø 58 mm
  • • Solid shaft, Ø 3/8" × 5/8"
  • • Optical measuring principle
  • • Shaft material: stainless steel
  • • Protection class IP67 on housing and shaft side
  • • ‐40…+85 °C
  • • Max. 6000 rpm (continuous operation 3000 rpm)
  • • 10…30 VDC
  • • Push-pull/HTL invertible
  • • Pulse frequency max. 300 kHz
  • • M12 × 1 male connector, 8-pin
  • • 360 pulses per revolution

General data

Moment of inertia of the rotor 1.8 × 10-6 kgm²
Max. rotational speed 6000 U/min
Incremental resolution 360 ppr
Output type Incremental
Starting torque < 0.05 Nm

Mechanical data

Axial shaft load 50 N
Shaft type Solid shaft
Shaft diameter D 9525 mm
Shaft diameter D 375 in
Shaft material Stainless steel
Elektrischer Anschluss Connector, M12 × 1
Elektrischer Anschluss 8-pin
Shaft Length L [mm] 15.875
Radial shaft load 100 N
Flange type Clamping flange
Shaft length X 0.625 in
Housing material Die-cast zinc
Flange diameter Ø 58 mm

Electrical data

Wire break/reverse polarity protection yes
Signal level low max. 0.5 V
Signal level high min. U - 1 VB
Pulse frequency max. 300 kHz
Short circuit protection yes
Output function Push-Pull/HTL, invertable
Output current up to 30 mA
No-load current up to 100 mA
Operating voltage UB from 10 to 30 VDC

Ambient Conditions

Protection class shaft IP67
Ambient temperature from -40 to 85 °C
Vibration resistance 300 m/s², 10…2000 H
Shock resistance 3000 m/s², 6 ms
Degree of protection (IP) IP67

Allgemein

Measurement principle Optical
100010243 (DE)
EDB_100010243_ger_de.pdf
100010243 (EN)
EDB_100010243_gbr_en.pdf
100008450
100008450.pdf
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 63.5 mm; 3 mm thick
    1544631
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 80 mm; 4 mm thick
    1544642
  • Euro flange – aluminium flange adapter for solid shaft encoders, Ø 115 mm; reference diameter 100 mm; adapts 58 mm clamping flange to Euro flange
    1544633
  • Aluminium flange adapter for solid shaft encoders, Ø 65 mm; adapts to Ø 65 mm flange and 48 mm reference diameter
    1544636
  • Aluminium angle flange for solid shaft encoders with Ø 58 mm clamping flange
    1544638
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 70 mm; 10 mm thick
    1544641
  • Aluminium flange adapter, rectangular, for solid shaft encoders with clamping flange; edge length 58 mm; 4 mm thick
    1544630
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 58 mm; adapts clamping flange to synchro flange
    1544635
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 70 mm; thickness 4 mm, adapts to Ø 70 mm flange
    1544637
  • Aluminium flange adapter for solid shaft encoders with clamping flange, Ø 70 mm; thickness 10 mm, adapts to Ø 70 mm flange
    1544640
Compare