Turck
Turck
I/O Hub for Connecting Digital Signals to IO-Link Master 16 Digital PNP Inputs
SKU: 6814100 Type: TBIL-M1-16DIP
Available3–5 business days delivery
€145.90 / pieces
€173.62 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- IO-Link V1.1 Class A
- Glass fiber reinforced housing
- Shock and vibration tested
- Fully potted module electronics
- Protection classes IP65, IP67, IP69K
- ATEX Zone 2/22
- CCC-Ex
- 2 digital inputs per slot
- I&M data sets support installation and maintenance
- IO-Link diagnostics for short circuit and supply voltage
General Information
| Mounting | 4 mounting holes Ø 4.3 mm |
| MTTF | 139 years acc. to SN 29500 (Ed. 99) 20 °C |
| IO-Link | Green OFF Power off |
| IO-Link | Flashing IO-Link communication OK, |
| IO-Link | valid process data is sent |
| IO-Link | Red ON IO-Link communication or module error |
| IO-Link | invalid process data or diagnosis enabled |
| Ambient temperature | from -40 to 70 °C |
| Dimensions (L x W x H) | 54 x 150 x 27.4 mm |
| Storage temperature | from -40 to 85 °C |
| Altitude | Max. 5000 m |
| LED | Color Status Description |
| Housing material | PA6-GF30 |
| Degree of protection (IP) | IP67 |
| Degree of protection (IP) | IP69K |
IO-Link
| Transmission rate | COM 2 / 38.4 kbps |
| Transmission physics | corresponds to 3-wire physics (PHY2) |
| IO-Link port type | Class A |
| Frame type | 2.2 |
| Connectivity IO-Link | 1 × M12 |
| IO-Link specification | V 1.1 |
| Parameterization | IO-Link master |
Supply
| Admissible range | 18…30 VDC |
| Admissible range | V1 max. 4 A |
| Power dissipation, typical | ≤ 3.2 W |
| Sensor/actuator supply | Class-A supply from V1 |
| Sensor/actuator supply | Short circuit-proof, 120 mA per slot |
| Operating current | Max. 135 mA |
| Supply voltage | 24 VDC |
| Connection technology power supply | M12 |
Digital inputs
| Number of channels | 16 digital PNP inputs (EN 61131-2) |
| Low-level signal voltage | -3…5 VDC (EN 61131-2, type 1 and 3) |
| Max. input current | 7 mA |
| Electrical isolation | inputs to FE 500VDC |
| Type of input diagnostics | Group diagnostics |
| High level signal voltage | 11…30 VDC (EN 61131-2, type 1 and 3) |
| Connectivity inputs | M12 |
Inputs LED Status
| C1 A / B … C8 A / B | Green OFF Input inactive, logic 0 |
| C1 A / B … C8 A / B | ON Input active, logic 1 |
| C1 A / B … C8 A / B | Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 |
| C1 A / B … C8 A / B | MSB LSB |
| Inputs | 0 DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1 |
| Inputs | C4P2 (B) C4P4 (A) C3P2 (B) C3P4 (A) C2P2 (B) C2P4 (A) C1P2 (B) C1P4 (A) |
| Inputs | 1 DI16 DI15 DI14 DI13 DI12 DI11 DI10 DI9 |
| Inputs | C8P2 (B) C8P4 (A) C7P2 (B) C7P4 (A) C6P2 (B) C6P4 (A) C5P2 (B) C5P4 (A) |
Standard/Directive conformity
| Shock test | Acc. to EN 60068-2-27 |
| Approvals and certificates | CEUKCAATEX Zone 2/22 |
| Approvals and certificates | CCC-Ex |
| Approvals and certificates | UV resistant acc. to DIN EN ISO 4892-2A (2013) |
| Vibration test | Acc. to EN 60068-2-6 |
| Vibration test | Acceleration up to 20 g |
| UL Certificate | cULus LISTED 21 W2, Encl.type 1 IND.CONT.EQ. |
| Drop and topple | Acc. to IEC 60068-2-31/IEC 60068-2-32 |
| Note on ATEX/IECEx | The Quick Start Guide with information on use in Ex |
| Note on ATEX/IECEx | areas must be observed. |
| Electromagnetic compatibility (EMC) | Acc. to EN 61000-6-2/-6-4 |
Power supply
| Supply voltage | 24 VDC |
Other
| Housing material | Kunststoff |