IO-Link Master v1.1 with Integrated USB Port 1-Channel Operation in IOL or SIO Mode
Features
- • USB-compatible IO-Link master
- • Commissioning/parameterization of IOLink devices via FDT/DTM
- • Control environment not required
- • Transmission of process and service data
- • Integrated connectors: USB/B, M12 × 1, power supply
- • Power supply via USB or external power supply unit (included in set)
- • Compact aluminum housing
- • Protection class IP40 M12 × 1
Functional principle
IO-Link devices are easily put into operation with the IO-Link master 1.1. Commissioning of IO-Link devices, reading of process data (PD) and reading/writing of specified service data (SD) is possible, independently from the higher-level control. Pin 4 (C/Q) of the IO-Link master can be operated either in the IO-Link mode (IOL) or in the standard IO mode (SIO), depending on the DTM parametrization. The following transmission rates are possible 4.8 kbps (COM1), 38.4 kbps (COM2) and 230.4 kbps (COM3). Depending on the connected IO-link device, data back-up via an integrated parametrizing server is also supported. Easy connection to PC via USB port. Latest DTM version available for download on www.turck.com. IO-Link devices are directly supplied via the integrated mini USB port. In the event of increased current consumption, the connected devices should be supplied by the external plug-in power unit.
Mechanical data
| CH1(C/Q) | green off SIO mode active |
| CH1(C/Q) | slowly flashing IO-Link Scan Mode active, no communication |
| CH1(C/Q) | fast flashing IO-Link Preoperate Mode active |
| CH1(C/Q) | on IO-Link Operate Mode active |
| CH1(C/Q) | yellow off low signal at port 1 |
| CH1(C/Q) | on high signal at port 1 |
| CH2(DI/DO) | yellow off low signal at port 2 |
| CH2(DI/DO) | on high signal at port 2 |
| Error | red off no error |
| Error | on short-circuit, overload, communication error |
| Ambient temperature | from -5 to 55 °C |
| Weight | approx. 0.096 kg |
| Storage temperature | from -25 to 70 °C |
| PWR | yellow off power off |
| PWR | flashing undervoltage, overload with power suppy via USBon ready |
| LED | Color Status Description |
| Degree of protection (IP) | IP40 |
| Abmessung | 54 x 41 x 24 mm |
Electrical data
| Network connection | USB-B |
| IO-Link port | M12 × 1, A-coded |
| Max. load current above IO-Link port | 40 mA via USB-B (1.6 A via plug-in power supply) |
| Supply voltage | 24 VDC |
IO-Link
| Number of IO-Link ports | 1 |
| Function | SIO, COM1, COM2, COM3 |
| IO-Link | 1-channel operation in IOL or SIO mode |
| Network | USB |