Turck 
Turck
Pressure-Resistant Linear Position Sensor – Analog
SKU: 100002115 Type: LTE100M-HT10-LU10-P-0.25-H1151
Available 3–5 business days delivery
€553.00 / pieces
€658.07 incl. VAT
Features
- • Suited for hydraulic cylinders
- • Embedded housing design
- • The sensor is pressure resistant up to 340 bar (permanent), 680 bar (short-term)
- • Adjustable measuring range
- • Analog output 0.5…4.5 V
- • 0.25 m cable with M12 male connector
Functional principle
The LTE is a magnetostrictive sensor, optimized for precise position control in hydraulic cylinders. The absolute value sensor is very robust and precise, and also saves the position information in the event of a voltage failure, rendering additional zeroing unnecessary. The sensors operate on the non-contact function principle and are thus wear and maintenance free.
Mechanical data
| Active area material | Stainless steel, 1.4404 (AISI 316L) |
| Elektrischer Anschluss | Cable with connector, M12 × 1 |
| Design | Rod |
| Housing material | Stainless steel, 1.4305 (AISI 303) |
| Abmessung | 226.5 mm |
Electrical data
| Wire break/reverse polarity protection | yes (voltage supply) |
| Isolation test voltage | 0.5 kV |
| Load resistance voltage output | ≥ 2 kΩ |
| Electricity consumption | up to 60 mA |
| Output function | 5-pin, Analog output |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage UB | from 8 to 30 VDC |
| Voltage output | from 0.5 to 4.5 V |
Ambient Conditions
| Vibration resistance | 30 Hz (1 mm) |
| Ambient temperature | from -40 to 85 °C |
| Shock resistance | 100 g (11 ms) |
| Degree of protection (IP) | IP68 |
General data
| Resolution | 16 bit |
| Hysteresis | ≤ 0.026 mm |
| Repeatability | ≤ 0.01 % of full scale |
| Measuring range | 100 mm |
| Blind zone b | 63.2 mm |
| Blind zone a | 30 mm |
| Linearity deviation | ≤ 0.04 % f.s. |
Allgemein
| Measurement principle | Magnetostrictive |
