Turck 
Turck
Magnetic Field Sensor – Magnetic-inductive Proximity Sensor
SKU: 100001364 Type: BIM-EG08-Y1X-2-RS4.21T/S90
Available 3–5 business days delivery
€74.90 / pieces
€89.13 incl. VAT
Features
- • M8 × 1 threaded barrel
- • Stainless steel, 1.4427 SO
- • Rated operating distance 78 mm with DMR31-15-5 magnet
- • DC 2-wire, nom. 8.2 VDC
- • Output acc. to EN 60947-5-6 (NAMUR)
- • Pigtail with connector, M12 × 1
- • ATEX category II 1 G, Ex zone 0
- • ATEX category II 1 D, Ex zone 20
- • SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT0
- • SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1
Functional principle
Magnetic inductive proximity sensors are actuated by magnetic fields and are thus capable of detecting permanent magnets through non‐ferromagnetic materials (e.g. wood, plastic, non‐ferrous metals, aluminium, stainless steel). Thus it is possible to achieve large switching distances even with smaller housing styles. In combination with the actuation magnet DMR31‐15‐5 TURCK sensors feature a relatively high switching distance. Thus there are multiple detection possibilities, particularly if the mounting space is limited or other difficult sensing conditions prevail.
General data
| Rated switching distance | 78 mm |
| Rated switching distance | In conjunction with magnet DMR31-15-5 |
| Temperature drift | ≤ ±10 % |
| Hysteresis | 1…10 % |
| Repeatability | ≤ 0.3 % of full scale |
Ambient Conditions
| Display switch state | LED, Yellow |
| Vibration resistance | 55 Hz (1 mm) |
| MTTF | 6198 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -25 to 70 °C |
| Shock resistance | 30 g (11 ms) |
| Degree of protection (IP) | IP67 |
Electrical data
| Switching frequency | 1 kHz |
| Device designation | EX II 1 G Ex ia IIC T6 Ga/II 1 D Ex ia IIIC |
| Device designation | T135 °C Da |
| Device designation | (max. U = 20 V, I = 60 mA, P = 130 mW) |
| Device designation | i i i |
| Actuated current consumption | ≥ 2.1 mA |
| Output function | 2-wire, NAMUR |
| Approval acc. to | KEMA 02 ATEX 1090X |
| Current consumption non-actuated | ≤ 1.2 mA |
| Voltage | Nom. 8.2 VDC |
Mechanical data
| Active area material | Plastic, PA12-GF30 |
| Elektrischer Anschluss | Cable with connector, M12 × 1 |
| End caps | Plastic, PP |
| Cable quality | Ø 3 mm, Blue, Lif9Y-11Y, PUR, 2 m |
| Design | Threaded barrel, M8 x 1 |
| Max. tightening torque of housing nut | 5 Nm |
| Housing material | Stainless steel, 1.4427 SO |
| Abmessung | 41.6 mm |
Allgemein
| Special version | S90 Corresponds to:PUR cable |
