Turck
Turck
Isolating switching amplifier 2-channel
SKU: 7580020 Type: IMX12-DI01-2S-2T-0/24VDC
Available3–5 business days delivery
€153.00 / pieces
€182.07 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- 2 transistor outputs (ð 10kHz)
- Switchable: 2-channel or signal doubling
- Output mode adjustable (NO/NC mode)
- Input circuits monitored for wire-break/ short-circuit (ON/OFF switchable)
- Complete galvanic isolation
- Input reverse-polarity protected
- Removable screw terminals
- ATEX, IECEx, NEPSI, cUL, cFM, INMETRO, Kosha, TIIS, DNV, GL
- Use in Zone 2
- SIL 2
Semiconductor output circuits
| Switching current per output | ≤ 0.1 A |
| Voltage drop | ≤ 1.1 V at 20 mA, ≤ 1.8 V at 50 mA, ≤ 2.7 V at 100 |
| Voltage drop | mA |
| Switching frequency | up to 10000 Hz |
| Output circuits | 2 x transistor (potential-free, short-circuit proof) |
| Switching voltage | up to 30 V |
Galvanic separation
| Output 1 to output 2 | 100 V RMS acc. to EN 50178 and EN 61010-1 |
| Output 1 to supply | 100 V RMS acc. to EN 50178 and EN 61010-1 |
| Test voltage | 2.5 kV RMS |
| Input 2 to output 2 | 375 V peak value acc. to EN 60079-11 |
| Application area | II (1) G, II (1) D |
| Application area | II 3 (1) G |
| Output 2 to supply | 100 V RMS acc. to EN 50178 and EN 61010-1 |
| Ignition protection category | [Ex ia Ga] IIC; [Ex ia Da] IIIC |
| Ignition protection type | Ex nA [ia Ga] IIC T4 Gc |
| Input 1 to supply | 375 V peak value acc. to EN 60079-11 |
| Input 1 to output 1 | 375 V peak value acc. to EN 60079-11 |
| Use in SIL safety circuits | SIL 2 acc. to IEC 61508 |
| Ex approval acc. to conformity certificate | TÜV 14 ATEX 147004 X |
| Input 2 to supply | 375 V peak value according to EN 60079-11 |
| Important note | For Ex-applications the values specified in the corresponding Ex certificates (ATEX, IECEx, UL, etc.) apply. |
| Important note | If the device is used in applications to achieve functional safety according to IEC 61508, the safety |
| Important note | manual must be used. Information in the data sheet |
| Important note | are not valid for functional safety. |
NAMUR input
| Wire breakage threshold | ≤ 0.06 mA |
| Switch-on threshold | 1.75 mA |
| Short-circuit current | 8.2 mA |
| Input resistance | 1 kΩ |
| Switch-off threshold | 1.55 mA |
| Short-circuit threshold | ≥ 6.4 mA |
| No-load voltage | 8.2 VDC |
| NAMUR | EN 60947-5-6 |
| Line Resistance | ≤ 50 Ω |
| Input circuit monitoring | on/off switchable |
Displays/Operating elements
| Operational readiness | Green |
| Switching state | Yellow |
| Error indication | red |
Allgemein
| Nominal voltage | 24 VDC |
| Power dissipation, typical | ≤ 0.64 W |
| Inputs | 2-channel or 1-channel with signal doubling |
| Operating voltage | from 10 to 30 V |
| Power consumption | up to 0.8 VA |
Mechanical data
| Altitude | Up to 2000 m above sea |
| Altitude | level |
| Pollution degree | II |
| Overvoltage category | II (EN 61010-1) |