HomePosition SensorsMagnetic Sensors1600608
TurckMagnetic Field Sensor For Detection of Ferromagnetic Parts – Image 1
Turck

Magnetic Field Sensor For Detection of Ferromagnetic Parts

SKU: 1600608 Type: NIMFE-M12/4.6L88-UP6X-H1141
Available3–5 business days delivery
€281.20 / pieces
€334.63 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • Threaded barrel, M12/M8
  • Chrome-plated brass
  • DC 3-wire, 10…30 VDC
  • NC/NO parametrizable with teach adapter VB2‐SP1
  • M12 x 1 male connector

Functional principle

The weld sensors are available in different versions, with different signal intensities and diameters. Ferromagnetic parts which differ strongly in their material properties and diameters can thus be detected. A target part has to be located within the so called sensitive area in order to be detected. The internal sensor signal reaches the maximum intensity if the sensitive area is completely covered by the target. Partial coverage is also possible. Sensitive area S = 9 mm Within this area the sensor signal changes when components are connected. Maximum range M = 13 mm In case of complete coverage of the sensitive area the maximum signal intensity is achieved.

Electrical data

DC rated operating current Ie≤ 200 mA
Wire break/reverse polarity protectionyes/Complete
Isolation test voltage0.5 kV
Voltage drop at Ie≤ 1 V
Short circuit protectionyes/Cyclic
Output function3-wire, Connection programmable, PNP
No-load currentup to 15 mA
Residual current≤ 0.1 mA
Ripple Uss≤ 10 % UBmax
Operating voltagefrom 10 to 30 V

Ambient Conditions

Display switch stateLED, Yellow
Display operating voltageLED, Green
Vibration resistance55 Hz (1 mm)
MTTF874 years acc. to SN 29500 (Ed. 99) 40
MTTF°C
Ambient temperaturefrom -25 to 70 °C
Shock resistance30 g (11 ms)
Degree of protection (IP)IP67

Mechanical data

Active area materialMetal, CuZn, chrome-plated
Elektrischer AnschlussConnector, M12 × 1
DesignThreaded barrel, M12 x 1
Max. tightening torque of housing nut10 Nm
Housing materialMetal, CuZn, Chrome-plated
Abmessung88 mm

Other

DesignGewinderohr
Housing materialMessing
Connector typeM12
Switching outputPNP