Inclinometer – With Switching Outputs

Name: Inclinometer – With Switching Outputs
Brand: Turck
SKU: 100026934
Price: 195 EUR
Availability: InStock

SKU: 100026934 Type: B2N85H-QR20-2UPN6X3-H1141

Available 3–5 business days delivery

€195.00 / pieces

€232.05 incl. VAT

Data sheet

Features

• Rectangular, plastic, Ultem
• Status displayed via LED
• Angle detection via two axis with ±85 ° measuring range and two freely configurable switching outputs (PNP/NPN)
• High protection class IP68/IP69K
• Protected against salt spray and rapid temperature change
• 10…30 V DC
• Male connector, M12 × 1, 4-pin
• Parameterization via IO-Link with USB-2IOL-0002

Functional principle

The inclinometers use an acceleration measuring cell to determine the angle. The Earth's gravity is used as a reference. If the inclinometer changes its angle relative to the Earth's gravity, this is detected by the acceleration measuring cell. The robust sensors are positioned with the cast side on a flat surface so that the casting compound is covered. The sensor is then secured with two screws.

Electrical data

DC rated operating current Ie	≤ 200 mA
Wire break/reverse polarity protection	yes
Isolation test voltage	0.5 kV
Electricity consumption	up to 50 mA
Output function	4-pin, NO/NC, PNP/NPN
Ripple Uss	≤ 10 % UBmax
Operating voltage UB	from 10 to 30 VDC

Ambient Conditions

Display switch state	2 × LEDs, Yellow
Display operating voltage	LED, Green
MTTF	548 years acc. to SN 29500 (Ed. 99) 40
MTTF	°C
Ambient temperature	from -40 to 85 °C
Temperature changes (EN60068-2-14)	-40… +85 °C; 20 cycles
UL Certificate	E351232
Vibration resistance	20 g; 5 h/Achse; 3
Shock resistance	150 g; 4 ms ½ sine
Degree of protection (IP)	IP69K
Degree of protection (IP)	IP68