Turck 
Turck
Inclinometer With Analog Outputs
SKU: 100031453 Type: B2N45H-QR20-2LI2X3-H1151
Available 3–5 business days delivery
€195.00 / pieces
€232.05 incl. VAT
Features
- • Rectangular, plastic, Ultem
- • Status displayed via LED
- • Angle detection along two axes with ±45 ° measuring range
- • High protection class IP68/IP69K
- • Protected against salt spray and rapid temperature change
- • 15…30 VDC
- • M12 × 1 male connector, 5-pin
- • Analog output 4…20 mA
- • The center point of the measuring range can be adjusted using teach adaptor TX1Q20L60
- • Individual parameterization possible with USB-2-IOL-0002
Functional principle
The inclinometers use an acceleration measuring cell to determine the angle. The Earth's gravity is used as a reference. If the inclinometer changes its angle relative to the Earth's gravity, this is detected by the acceleration measuring cell. The robust sensors are positioned with the cast side on a flat surface so that the casting compound is covered. The sensor is then secured with two screws.
Electrical data
| Wire break/reverse polarity protection | yes/yes |
| Isolation test voltage | 0.5 kV |
| Load resistance voltage output | ≥ 4.7 kΩ |
| Current output | 4…20 mA |
| Electricity consumption | up to 80 mA |
| Short circuit protection | yes |
| Output function | 5-pin, Analog output |
| Load resistance current output | ≤ 0.4 kΩ |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage UB | from 15 to 30 VDC |
Ambient Conditions
| Display operating voltage | LED, Green |
| MTTF | 297 years acc. to SN 29500 (Ed. 99) 40 °C |
| Ambient temperature | from -40 to 85 °C |
| Temperature changes (EN60068-2-14) | -40… +85 °C; 20 cycles |
| Measuring range display | LED, yellow |
| UL Certificate | E351232 |
| Vibration resistance | 20 g; 5 h/Achse; 3 |
| Shock resistance | 150 g; 4 ms ½ sine |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP68 |
General data
| Number of measurement axes | 2 |
| Temperature drift | ≤ ± 0.025 %/K |
| Resolution | 16 bit |
| Repeatability | ≤ 0.2 % of full scale |
| Measuring range | -45…45° |
| Linearity deviation | ≤ 0.5 % |
Mechanical data
| Elektrischer Anschluss | Connector, M12 × 1 |
| Design | Rectangular, QR20 |
| Housing material | Plastic, Ultem |
| Abmessung | 71.6 x 62.6 x 20 mm |
Allgemein
| Measurement principle | Acceleration |