UHF Read/Write Device
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Rectangular, height 60 mm
- Active face in front
- Plastic, ABS
- Device only suitable for operation in Australia (AUS) and New Zealand (NZL) at 920…926 MHz
Functional principle
The UHF read/write heads form a transmission zone, the size of which may vary depending on the combination of read/write head and tag used. The read/write distances only represent standard values measured under laboratory conditions, free from any influences caused by surrounding materials. Attainable distances may vary due to component tolerances, mounting conditions, ambient conditions and material qualities, especially when mounted in metal. Testing of the application under real operating conditions is therefore essential, especially with on-the-fly reading and writing! Due to the higher energy needs of the transponder for a write operation, the range is reduced to approximately 40–60 % of the reading range.
Electrical data
| DC rated operational current | ≤ 1000 mA |
| Output power | 500 kHz |
| Output power | ≤ 0.5 W (ERP), adjustable |
| Data transfer | Alternating electromagnetic field |
| Radio and protocol standards | ISO 18000-63 |
| Technology | UHF RFID |
| Antenna polarization | RHCP |
| Output function | 110° |
| Output function | 4-wire, Read/Write |
| dards | EPCglobal Gen 2 |
| Operating region (UHF) | Australia (920…926 MHz) |
| Operating voltage | from 12 to 24 V |
Mechanical data
| Active area material | Plastic, ABS, black |
| Display operating voltage | LED, Green |
| Vibration resistance | 55 Hz (1 mm) |
| Elektrischer Anschluss | M12 × 1 |
| Packaging unit | 1 |
| Diagnostic display | differently adjustable |
| Ambient temperature | from -20 to 50 °C |
| Design | Rectangular |
| Installation conditions | Non-flush |
| Housing material | Aluminium, AL, Silver |
| Shock resistance | 30 g (11 ms) |
| Degree of protection (IP) | IP67 |
| Abmessung | 130 x 120 x 60 mm |
Other
| Design | Quader |
| Housing material | Aluminium |
| Connector type | M12 |
- Arm bracket for UHF RFID read/write heads TNxxx-Q175L200-H1147, TNxxx-Q240L280-H1147 and TNxxx- Q280L640-H11477030296
- BL ident cable, M12 female connector, straight to M12 male connector, straight, cable length: 2 m, jacket material: PUR, yellow; other cable lengths and qualities available, see www.turck.com6699200
- Cable for RFID Application in the Food Industry – Extension Cable6633193