Turck
Turck
TTMS-103A-G1/8-LIUPN-H1140-L013-40/85°C Temperature Detection – Stainless Steel Transmitter with Integrated Probe
SKU: 100045325 Type: TTMS-103A-G1/8-LIUPN-H1140-
L013-40/85°C
Available3–5 business days delivery
€167.30 / pieces
€199.09 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Miniature design
- Factory setting 40…85 °C
- Parameterizable via IO-Link
- Analog output 4…20 mA (2-wire)
- Switching output
- Process connection G1/8" male thread
Functional principle
All devices of the miniature transmitter series TTMS are made of stainless steel 1.4404 (AISI 316L). They are available with integrated probe or with M12 probe connection. Due to the integrated electronics, the limited temperature range must be observed, especially in the area of the M12 connector. Furthermore, the devices feature a current output (2-wire, 4…20 mA), a switching output and communication via IO-Link.
Analog output
| Load | ≤ [(V – 10 V)/21 mA] kΩ |
| Load | supply |
| Current output | 4…20 mA |
| Repeatability | 0.1 % of full scale applies to values > |
| Repeatability | +300 °C |
| Repeatability | 0.1 K |
| Note | Connection to PIN 1+2 |
| Accuracy | ± 0.3 K |
Reference conditions acc. to IEC 61298-1
| Auxiliary power | 24 VDC |
| Humidity | from 45 to 75 % |
| Atmospheric pressure | from 860 to 1060 hPa |
| Temperatur (-) | 15…+25 °C |
Programming FDT / DTM
| Transmission rate | COM 2 / 38.4 kbps |
| Transmission physics | corresponds to 3-wire physics (PHY2) |
| Frame type | 2.2 |
| Process data width | 16 bit |
| Included in the SIDI GSDML | Yes |
| Switchpoint information | 1 bit |
| Measured value information | 15 bit |
| Accuracy | ± 0.2 K |
Power supply
| Short-Circuit/Reverse Polarity Protection | yes / yes |
| Voltage drop at Ie | ≤ 2 V |
| Electricity consumption | up to 20 mA |
| Operating voltage | from 18 to 32 V |
| Degree of protection (IP) | IP67 |
| Electrical safety class | III |
Temperature behaviour
| Temperature coefficient zero point TK0 | ± 0.1 % of full scale/10 K |
| Temperature coefficient range TKs | ± 0.1 % of full scale/10 K |
Tests/approvals
| MTTF | 541 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
Mechanical data
| Sensor material | Stainless steel, 1.4404 (AISI 316L) |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Pressure resistance | 100 bar |
| Process connection | G 1/8'' male thread |
| Housing material | Stainless steel, 1.4404 (AISI 316L) |
Switching outputs
| Switching point accuracy | ± 0.3 K |
| Release position | -210…+640 °C |
| Switching point | -200…+650 °C |
| Switching cycles | ≥ 100 mil. |
| Output function | NO/NC programmable, PNP/NPN |
| Note | Connection to PIN 1+3+4. Please use |
| Note | a 3-wire cable for operation on a Turck |
| Note | TBEN IO-Link master. |
| Communication protocol | IO-Link |
| Rated operating current | 0.15 A |
Temperature range
| Outer diameter | 3 mm |
| Response time | t₀₅ = 1.5 s / t₀₉ = 6.0 s in water @ 0.2 m/s |
| Immersion depth L | 13 mm |
| Note | Max. temperature of electronics: |
| Note | 80 °C/176 °F |
| Factory setting | 40…85 °C |
| Factory setting | 104…185 °F |
| Accuracy | ±0.15 K + 0.002 ∙ |t| (-30…300 °C) |
| Measuring range | -50…110 °C |
| Measuring range | -58…230 °F |
| Messelement (nach DIN IEC 751) | Pt100, DIN EN 60751, class A |
Ambient Conditions
| Ambient temperature | from -40 to 80 °C |
| Storage temperature | from -40 to 80 °C |
Output
| Output 1 | Switching output or IO-Link mode |
| Output 2 | Analog output |
IO-Link
| IO-Link specification | V 1.1 |
Other
| Process connection | G1/8 Außengewinde |
| Housing material | Edelstahl |
| Analog output | 4…20 mA |
| Connector type | M12 |
| Switching output | Schließer/Öffner |
| Switching output | PNP |
| Switching output | NPN |
