HomeProcess SensorsTemperature Sensors9910632
TurckTemperature Detection – With Current Output and PNP/NPN Transistor Switching Output – Image 1
Turck

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

SKU: 9910632 Type: TTM-100-LIUPN-H1140
Available3–5 business days delivery
€121.30 / pieces
€144.35 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet(DE)

Features

  • Miniature design
  • Factory setting 0…150 °C
  • Parameterizable via IO-Link
  • Analog output 4…20 mA (2-wire)
  • Switching output
  • For connection to external temperature probes

Functional principle

TP temperature probes (PT100 4-wire) can be plugged directly or via cable to the M12 connection at the TTM-100 temperature transmitter. The measured temperature is transformed

Analog output

Load≤ [(V – 10 V)/21 mA] kΩ
Loadsupply
Current output4…20 mA
Repeatability0.1 % of full scale applies to temperatures > +300 °C
Repeatability0.1 K
NoteConnection to PIN 1+2
Accuracy± 0.3 K

Reference conditions acc. to IEC 61298-1

Auxiliary power24 VDC
Humidityfrom 45 to 75 %
Atmospheric pressurefrom 860 to 1060 hPa
Temperatur (-)15…+25 °C

Programming FDT / DTM

Transmission rateCOM 2 / 38.4 kbps
Transmission physicscorresponds to 3-wire physics (PHY2)
Frame type2.2
Process data width16 bit
Included in the SIDI GSDMLYes
Switchpoint information1 bit
Measured value information15 bit
Accuracy± 0.2 K

Power supply

Short-Circuit/Reverse Polarity ProtectionIP67
Voltage drop at Ieyes / yes
Electricity consumptionup to 20 mA
Operating voltagefrom 8 to 32 V
Degree of protection (IP)IP67
Electrical safety classIII

Temperature behaviour

Temperature coefficient zero point TK0± 0.1 % of full scale/10 K
Temperature coefficient range TKs± 0.1 % of full scale/10 K

Tests/approvals

MTTF541 years acc. to SN 29500 (Ed. 99) 40
MTTF°C

Switching outputs

Switching point accuracy± 0.3 K
Release position-210…+640 °C
Switching point-200…+650 °C
Switching cycles≥ 100 mil.
Output functionNO/NC programmable, PNP/NPN
NoteConnection to PIN 1+3+4. Please use
Notea 3-wire cable for operation on a Turck
NoteTBEN IO-Link master.
Communication protocolIO-Link
Rated operating current0.15 A

Mechanical data

Elektrischer AnschlussConnector, M12 × 1
Process connectionM12 × 1
Housing materialStainless-steel/Plastic, 1.4404 (AISI
Housing material316L)

Temperature range

Response timedepending on connected temperature
Response timeprobe
NoteMax. temperature of electronics:
Note80 °C/176 °F
Factory setting0…150 °C
Factory setting32…302 °F
Measuring range-50…350 °C
Measuring range-58…662 °F
Messelement (nach DIN IEC 751)For connection to probes of the TP product series

Ambient Conditions

Ambient temperaturefrom -40 to 80 °C
Storage temperaturefrom -40 to 80 °C

Output

Output 1Switching output or IO-Link mode
Output 2Analog output

IO-Link

IO-Link specificationV 1.1

Other

Process connectionM12x1
Housing materialEdelstahl
Housing materialKunststoff
Analog output4…20 mA
Connector typeM12
Switching outputSchließer/Öffner
Switching outputPNP
Switching outputNPN