Which Sensor
HomeProcess SensorsTemperature Sensors9910632
Turck Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output – Image 1
Turck

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

SKU: 9910632 Type: TTM-100-LIUPN-H1140
Available 3–5 business days delivery
€121.30 / pieces
€144.35 incl. VAT
Data sheet (DE)

Features

  • • Miniature design
  • • Factory setting 0…150 °C
  • • Parameterizable via IO-Link
  • • Analog output 4…20 mA (2-wire)
  • • Switching output
  • • For connection to external temperature probes

Functional principle

TP temperature probes (PT100 4-wire) can be plugged directly or via cable to the M12 connection at the TTM-100 temperature transmitter. The measured temperature is transformed

Analog output

Load ≤ [(V – 10 V)/21 mA] kΩ
Load supply
Current output 4…20 mA
Repeatability 0.1 % of full scale applies to temperatures > +300 °C
Repeatability 0.1 K
Note Connection to PIN 1+2
Accuracy ± 0.3 K

Reference conditions acc. to IEC 61298-1

Auxiliary power 24 VDC
Humidity from 45 to 75 %
Atmospheric pressure from 860 to 1060 hPa
Temperatur (-) 15…+25 °C

Programming FDT / DTM

Transmission rate COM 2 / 38.4 kbps
Transmission physics corresponds to 3-wire physics (PHY2)
Frame type 2.2
Process data width 16 bit
Included in the SIDI GSDML Yes
Switchpoint information 1 bit
Measured value information 15 bit
Accuracy ± 0.2 K

Power supply

Short-Circuit/Reverse Polarity Protection IP67
Voltage drop at Ie yes / yes
Electricity consumption up to 20 mA
Operating voltage from 18 to 32 V
Operating voltage UB from 8 to 32 VDC
Degree of protection (IP) IP67
Electrical safety class III

Temperature behaviour

Temperature coefficient zero point TK0 ± 0.1 % of full scale/10 K
Temperature coefficient range TKs ± 0.1 % of full scale/10 K

Tests/approvals

MTTF 541 years acc. to SN 29500 (Ed. 99) 40
MTTF °C

Switching outputs

Switching point accuracy ± 0.3 K
Release position -210…+640 °C
Switching point -200…+650 °C
Switching cycles ≥ 100 mil.
Output function NO/NC programmable, PNP/NPN
Note Connection to PIN 1+3+4. Please use
Note a 3-wire cable for operation on a Turck
Note TBEN IO-Link master.
Communication protocol IO-Link
Rated operating current 0.15 A

Mechanical data

Elektrischer Anschluss Connector, M12 × 1
Process connection M12 × 1
Housing material Stainless-steel/Plastic, 1.4404 (AISI
Housing material 316L)

Ambient Conditions

Ambient temperature from -40 to 80 °C
Storage temperature from -40 to 80 °C

Output

Output 1 Switching output or IO-Link mode
Output 2 Analog output

Temperature range

Note Max. temperature of electronics:
Note 80 °C/176 °F
Factory setting 0…150 °C
Factory setting 32…302 °F
Measuring range -50…350 °C
Measuring range -58…662 °F
Messelement (nach DIN IEC 751) For connection to probes of the TP product series
Ansprechzeit (bei ruhender Luft) depending on connected temperature
Ansprechzeit (bei ruhender Luft) probe

IO-Link

IO-Link specification V 1.1
D101932
D101932.pdf
9910632 (DE)
EDB_9910632_ger_de.pdf
Compare