HomePosition SensorsUltrasonic Sensors100002505
Turck Ultrasonic Sensor – Diffuse Mode Sensor – Image 1
Turck

Ultrasonic Sensor – Diffuse Mode Sensor

SKU: 100002505 Type: RU200-CP40-LIU2P8X2T/S968
Available 3–5 business days delivery
€365.80 / pieces
€435.30 incl. VAT
Data sheet

Features

  • Separate transducers for transmitter and receiver
  • Rectangular housing 40 x 40 x 166 mm
  • Connection via screw terminals
  • Terminal chamber for M20 x 1.5 cable gland
  • Teach range adjustable via button
  • Blind zone: 5 cm
  • Range: 200 cm
  • Resolution: 1 mm
  • Aperture angle of sonic cone: ±60 °
  • 1x switching output, PNP
  • NO/NC programmable
  • 1x analog output, 4…20 mA/0…10 V
  • Inverted behavior for 0 V echo loss

Electrical data

DC rated operating current Ie ≤ 150 mA
Standby delay ≤ 300 ms
Load resistance voltage output ≥ 1 kΩ
Response time typical < 160 ms
Current output 4…20 mA
Wire breakage protection yes
Switching frequency up to 3 Hz
Voltage drop at Ie ≤ 2.5 V
Adjustment option Push Button
Hysteresis ≤ 20 mm
Short circuit protection yes/Latching
Polarity protection yes
Output function NO/NC, PNP
Load resistance current output ≤ 0.5 kΩ
Output 1 Switching output
Output 2 Analog output
Residual ripple 10 % Uss
No-load current up to 50 mA
Residual current ≤ 0.1 mA
Operating voltage UB from 15 to 30 VDC
Voltage output from 0 to 10 V
Lastwiderstand (U-Ausgang) ≤ 1000 Ω

Mechanical data

Display switch state LED, Yellow
Elektrischer Anschluss Terminal chamber, Terminal box with cable gland, 4-wire
Pressure resistance 0.5…5 bar
Object detected LED, Green
Ambient temperature from 0 to 70 °C
Design Rectangular, CP40
Radiation direction straight
Housing material Plastic, PBT-GF30-V0
Degree of protection (IP) IP40
Abmessung 166 x 40 x 40 mm

Ultrasonic data

Edge lengths of the nominal actuator 100 mm
Function Proximity switch
Resolution 1 mm
Approach speed ≤ 3 m/s
Overrun Speed ≤ 3 m/s
Ultrasound frequency 120 kHz
Range from 0.05 to 2 m
Minimum switching range 20 mm
Repeatability ≤ 0.25 % of full scale
Minimum measuring range 200 mm

Tests/approvals

Vibration resistance 20 g, 10…55 Hz, sine, 3 axes, 30 min/axis according to IEC 60068-2-6
Declaration of conformity EN ISO/IEC EN 60947-5-7
Shock test 30 g, 11 ms, half sine, 3 axes according
Shock test to IEC 60068-2-27
Approvals cULus
Approvals CE

Allgemein

Special version S968 Corresponds to:customised analogue curve characteristic