HomePosition SensorsUltrasonic Sensors100002505
TurckUltrasonic Sensor – Diffuse Mode Sensor – Image 1
Turck

Ultrasonic Sensor – Diffuse Mode Sensor

SKU: 100002505 Type: RU200-CP40-LIU2P8X2T/S968
Available3–5 business days delivery
€365.80 / pieces
€435.30 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • Separate transducers for transmitter and receiver
  • Rectangular housing 40 x 40 x 166 mm
  • Connection via screw terminals
  • Terminal chamber for M20 x 1.5 cable gland
  • Teach range adjustable via button
  • Blind zone: 5 cm
  • Range: 200 cm
  • Resolution: 1 mm
  • Aperture angle of sonic cone: ±60 °
  • 1x switching output, PNP
  • NO/NC programmable
  • 1x analog output, 4…20 mA/0…10 V
  • Inverted behavior for 0 V echo loss

Electrical data

DC rated operating current Ie≤ 150 mA
Standby delay≤ 300 ms
Load resistance voltage output≥ 1 kΩ
Response time typical< 160 ms
Current output4…20 mA
Load resistance (current output)≤ 1000 Ω
Wire breakage protectionyes
Switching frequencyup to 3 Hz
Voltage drop at Ie≤ 2.5 V
Adjustment optionPush Button
Hysteresis≤ 20 mm
Short circuit protectionyes/Latching
Polarity protectionyes
Output functionNO/NC, PNP
Load resistance current output≤ 0.5 kΩ
Output 1Switching output
Output 2Analog output
Residual ripple10 % Uss
No-load currentup to 50 mA
Residual current≤ 0.1 mA
Operating voltagefrom 15 to 30 V
Voltage outputfrom 0 to 10 V

Mechanical data

Display switch stateLED, Yellow
Elektrischer AnschlussTerminal chamber, Terminal box with cable gland, 4-wire
Pressure resistance0.5…5 bar
Object detectedLED, Green
Ambient temperaturefrom 0 to 70 °C
DesignRectangular, CP40
Radiation directionstraight
Housing materialPlastic, PBT-GF30-V0
Degree of protection (IP)IP40
Abmessung166 x 40 x 40 mm

Ultrasonic data

Edge lengths of the nominal actuator100 mm
FunctionProximity switch
Resolution1 mm
Approach speed≤ 3 m/s
Overrun Speed≤ 3 m/s
Ultrasound frequency120 kHz
Rangefrom 0.05 to 2 m
Minimum switching range20 mm
Repeatability≤ 0.25 % of full scale
Minimum measuring range200 mm

Tests/approvals

Vibration resistance20 g, 10…55 Hz, sine, 3 axes, 30 min/axis according to IEC 60068-2-6
Declaration of conformity EN ISO/IECEN 60947-5-7
Shock test30 g, 11 ms, half sine, 3 axes according
Shock testto IEC 60068-2-27
ApprovalscULus
ApprovalsCE

Allgemein

Special versionS968 Corresponds to:customised analogue curve characteristic

Other

DesignQuader
Housing materialKunststoff
Analog output4…20 mA
Connector typeKlemme
Switching outputSchließer/Öffner
Switching outputPNP