HomePosition SensorsUltrasonic Sensors100003167
TurckUltrasonic Sensor Level Control – Image 1
Turck

Ultrasonic Sensor Level Control

SKU: 100003167 Type: LUS211-40-51-LI2UPN8-H1141
Available3–5 business days delivery
€504.00 / pieces
€599.76 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • 4-digit, 2-colored, 12-segment display, rotatable by 180°
  • Housing is rotatable after mounting the process connection
  • G3/4" process connection
  • Sealing ring included in delivery (stainless steel ring with NBR seal)
  • Blind zone: 0.5 cm
  • Range: 40 cm
  • Resolution: 0.5 mm
  • Aperture angle of sonic cone: ±15 °
  • 1 × switching output, PNP/NPN
  • 1 × analog output, 4…20 mA / 0…10 V / additional switching output, PNP/NPN
  • NO/NC programmable
  • Transmission of process value and parametrization via IO-link

Functional principle

Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-7, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries.

Electrical data

Standby delay≤ 300 ms
Load resistance voltage output≥ 8 kΩ
Response time typical< 60 ms
Current output4…20 mA
Load resistance (current output)≤ 1000 Ω
Switching frequencyup to 5 Hz
Voltage drop at Ie≤ 2.5 V
No-load current I0≤ 150 mA
Adjustment optionCapacitive Sensor
Adjustment optionIO-Link
Hysteresis≤ 50 mm
Short circuit protectionyes
Polarity protectionyes
Output functionNO/NC, PNP/NPN, analog output
Load resistance current output≤ 0.5 kΩ
Output 1Switching output or IO-Link mode
Output 2Analog output
Communication protocolIO-Link
Residual current≤ 0.1 mA
Operating voltagefrom 18 to 33 V
Voltage outputfrom 0 to 10 V

IO-Link

Maximum Cable Length20 m
IO-Link port typeClass A
Communication modeCOM 2 (38.4 kBaud)
Function pin 4IO-Link
Function Pin 2DI
Frame type2.2
Process data width32 bit
Minimum cycle time5 ms
Profile supportSmart Sensor Profile
Included in the SIDI GSDMLYes
Switchpoint information4 bit
IO-Link specificationV 1.1
Measured value information15 bit

Ultrasonic data

Edge lengths of the nominal actuator20 mm
Temperature drift± 1.5% of full scale% of full scale
FunctionProximity switch
Resolution0.5 mm
Approach speed≤ 3 m/s
Overrun Speed≤ 1.3 m/s
Ultrasound frequency320 kHz
Rangefrom 0.005 to 0.4 m
Minimum switching range5 mm
Minimum measuring range50 mm

Tests/approvals

Vibration resistance20 g, 10…2000 Hz, sine, 3 axes, 30 min/axis according to IEC 60068-2-6
Declaration of conformity EN ISO/IECEN 60947-5-7
Shock test50 g, 11 ms, half sine, 3 axes according to IEC
Shock test60068-2-27
Type codeIdent no. Dimension drawing
ApprovalscULus
ApprovalsCE

Mechanical data

Elektrischer AnschlussConnector, M12 × 1, 4-wire
Pressure resistance0.5…5 bar
Ambient temperaturefrom -25 to 70 °C
Process connectionG 3/4''
Transducer materialPlastic, Epoxyd resin and PU foam
DesignSmooth barrel, LUS
Radiation directionstraight
Housing materialStainless-steel/Plastic, 1.4404 (AISI 316L)/Grilamid
Housing materialTR90 UV
Degree of protection (IP)IP67
Degree of protection (IP)IP69K
AbmessungØ 38 x 127.1 mm

Other

Process connectionG3/4
DesignRohr
Housing materialEdelstahl
Housing materialKunststoff
Analog output4…20 mA
Connector typeM12
Switching outputSchließer/Öffner
Switching outputPNP
Switching outputNPN