Turck 
Turck
Magnetic Field Sensor – For Pneumatic Cylinders
SKU: 100001905 Type: BIM-UNC-AP6X-0.3-PSG3M
Available 3–5 business days delivery
€76.60 / pieces
€91.15 incl. VAT
Features
- • For SMC C-groove cylinders without mounting accessories
- • One-hand mounting possible
- • Stable mounting
- • Magneto-resistive sensor
- • DC 3-wire, 11…30 VDC
- • NO contact, PNP output
- • Pigtail with M8 × 1 male connector
Functional principle
Magnetic field sensors are activated by magnetic fields and are used, in particular, for the detection of the piston position in pneumatic cylinders. As magnetic fields can permeate non-magnetizable metals, they detect a permanent magnet attached to the piston through the aluminium cylinder wall.
Electrical data
| DC rated operating current Ie | ≤ 100 mA |
| Switching frequency | 0.3 kHz |
| Wire break/reverse polarity protection | yes/Complete |
| Isolation test voltage | 0.5 kV |
| Voltage drop at Ie | ≤ 1.8 V |
| Short circuit protection | yes/Cyclic |
| Output function | 3-wire, NO contact, PNP |
| No-load current | up to 15 mA |
| Residual current | ≤ 0.1 mA |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage UB | from 11 to 30 VDC |
Mounting on the following profiles
| Display switch state | LED, Yellow |
| Included in delivery | Cable clip |
| Cylinder design | # |
Mechanical data
| Active area material | plastic, PP-GF20 |
| Litz wire | 40 x0.05 mm |
| Elektrischer Anschluss | Cable with connector, M8 × 1 |
| Tightening torque fixing screw | 0.1 Nm |
| Cable quality | Ø 2 mm, Gray, Lif9Y-11Y, PUR, 0.3 m |
| Design | Rectangular, UNC |
| Housing material | Plastic, PP-GF20 |
| Abmessung | 22 x 4 x 4.6 mm |
Ambient Conditions
| Vibration resistance | 55 Hz (1 mm) |
| MTTF | 2283 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -25 to 70 °C |
| Shock resistance | 30 g (11 ms) |
| Degree of protection (IP) | IP67 |
General data
| Temperature drift | ≤ 0.3 mm |
| Overrun Speed | ≤ 0.3 m/s |
| Hysteresis | ≤ 1 mm |
| Repeatability | ≤ ± 0.1 mm |