HomePosition SensorsCylinder Sensors4685500
TurckMagnetic Field Sensor – For Pneumatic Cylinders – Image 1
Turck

Magnetic Field Sensor – For Pneumatic Cylinders

SKU: 4685500 Type: BIM-NST-AN6X-H1141
Available3–5 business days delivery
€71.60 / pieces
€85.20 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • Plastic, PA12-GF30
  • Magnetic-inductive sensor
  • DC 3-wire, 10…30 VDC
  • NO contact, NPN output
  • M12 x 1 connector

Functional principle

Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder.

Electrical data

DC rated operating current Ie≤ 200 mA
Switching frequency1 kHz
Wire break/reverse polarity protectionyes/Complete
Isolation test voltage0.5 kV
Voltage drop at Ie≤ 1.8 V
Short circuit protectionyes/Cyclic
Output function3-wire, NO contact, NPN
No-load currentup to 15 mA
Residual current≤ 0.1 mA
Ripple Uss≤ 10 % UBmax
Operating voltagefrom 10 to 30 V

Mounting on the following profiles

Display switch stateLED, Yellow
Included in delivery1 x screw M3x20, 1 x tension bolt, 1 x
Included in deliveryspring washer
Cylinder designN K # # #

Mechanical data

Active area materialPlastic, PA12-GF30
Elektrischer AnschlussConnector, M12 × 1
DesignRectangular, NST
Housing materialPlastic, PA12-GF30
Abmessung28 x 17 x 14 mm

Ambient Conditions

Vibration resistance55 Hz (1 mm)
MTTF2283 years acc. to SN 29500 (Ed. 99) 40
MTTF°C
Ambient temperaturefrom -25 to 70 °C
Shock resistance30 g (11 ms)
Degree of protection (IP)IP67

General data

Temperature drift≤ 0.1 mm
Overrun Speed≤ 10 m/s
Hysteresis≤ 1 mm
Repeatability≤ ± 0.1 mm

Other

DesignQuader
Housing materialKunststoff
Connector typeM12
Switching outputSchließer/Öffner
Switching outputNPN