HomePosition SensorsCylinder Sensors4685768
TurckBIM-UNT-AG41X-0.3-RS4.23/S1139/S1160 Magnetic Field Sensor – For Pneumatic Cylinders – Image 1
Turck

BIM-UNT-AG41X-0.3-RS4.23/S1139/S1160 Magnetic Field Sensor – For Pneumatic Cylinders

SKU: 4685768 Type: BIM-UNT-AG41X-0.3-RS4.23/S1139/ S1160
Available3–5 business days delivery
€60.80 / pieces
€72.35 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • For T-groove cylinders without mounting accessories
  • Optional accessories for mounting on other cylinder designs
  • One-hand mounting possible
  • Stable mounting
  • Magneto-resistive sensor
  • Long overtravel
  • For large cylinders
  • Irradiation-crosslinked TPU cable for applications in welding areas
  • DC 2-wire, 10…55 VDC
  • Polarized version
  • NO contact
  • Pigtail with male end, M12 x 1

Functional principle

Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder.

Electrical data

DC rated operating current Ie≤ 100 mA
Switching frequency1 kHz
Wire break/reverse polarity protectionno/Polarized
Isolation test voltage0.5 kV
Voltage drop at Ie≤ 3.5 V
Short circuit protectionyes/Cyclic
Output functionNO contact, 2-wire
Smallest operating current≥ 3 mA
Residual current≤ 0.8 mA
Ripple Uss≤ 10 % UBmax
Operating voltagefrom 10 to 55 V

Mounting on the following profiles

Display switch stateLED, Yellow
Included in deliverycable clip
Cylinder designE N K F

Mechanical data

Active area materialPlastic, PP
Elektrischer AnschlussCable with connector, M12 × 1
Tightening torque fixing screw0.4 Nm
Cable qualityØ 2.9 mm, Gray, Lif9Y-11YFHF, TPU,
Cable quality0.3 m
DesignRectangular, UNT
Core cross-section2 x 0.14 mm2
Housing materialPlastic, PP
Abmessung28 x 5 x 6 mm

Ambient Conditions

Vibration resistance55 Hz (1 mm)
MTTF2283 years acc. to SN 29500 (Ed. 99) 40
MTTF°C
Ambient temperaturefrom -25 to 70 °C
Shock resistance30 g (11 ms)
Degree of protection (IP)IP68

General data

Temperature drift≤ 0.1 mm
Overrun Speed≤ 10 m/s
Hysteresis≤ 1 mm
Repeatability≤ ± 0.1 mm

Allgemein

Special versionS1139-S1160 Corresponds to:Long overtravel
Special versionWeld-resistant line

Other

DesignQuader
Housing materialKunststoff
Connector typeM12
Connector typeKabel
Switching outputSchließer/Öffner