HomeSensor AnalyticsFieldbus Modules100000041
Turck CODESYS 3 Programmable Gateway for the BL67 I/O System Multiprotocol Ethernet Gateway for PROFINET, EtherNet/IP and Modbus TCP with WebVisu License – Image 1
Turck

CODESYS 3 Programmable Gateway for the BL67 I/O System Multiprotocol Ethernet Gateway for PROFINET, EtherNet/IP and Modbus TCP with WebVisu License

SKU: 100000041 Type: BL67-PG-EN-V3-WV
Available 3–5 business days delivery
€679.00 / pieces
€808.01 incl. VAT
Data sheet

Features

  • CODESYS V3 PLC Runtime
  • CODESYS WebVisu license
  • CODESYS OPC UA server/client
  • IIoT gateway for Turck Cloud
  • PROFINET device
  • EtherNet/IP device
  • Modbus TCP master/slave
  • Protection class IP67
  • LEDs for display of PLC status, supply voltage, group and bus faults
  • 2 × M12 Ethernet, 4-pin, D-coded
  • Switched or dual MAC mode
  • 10 Mbps/100 Mbps
  • 7/8″ male connector for power supply, 5pin

Functional principle

The programmable BL67 gateways can be used as autonomous PLCs or as decentral PLCs in a network interconnection for fast preprocessing of signals. BL67 gateways are the head component of a BL67 station. The BL67 extension modules communicate via the internal module bus with the gateway and can be configured independently of the fieldbus protocol.

Programming CODESYS V3

Programming interface Ethernet, USB
Web server 192.168.1.254 (Default)
Output data 4 kByte
Non-volatile memory 16 kByte
Storage 512 kByte
Input data 4 kByte
Released for CODESYS version V 3.5.14.2
Application tasks 5
Program memory 1024 kByte
Cycle time < 1 ms for 1000 IL commands (without I/O cycle)
Processor ARM, 32 Bit
Programming languages IEC 61131-3 (IL, LD, FBD, SFC, ST)
Real time clock yes
Service interface Ethernet, mini USB

Temperature derating

DIN rail mounting yes, Attention: Offset
> 55 °C Steady ambient air Derating: Max. power consumption = 5 A
MTTF 116 years acc. to SN 29500 (Ed. 99) 20 °C
Relative humidity 15…95 % (internal), level RH-2, no condensation
Relative humidity (when stored at 45 °C)
Type code Ident no. Dimension drawing
- up to 5 g (at 10 to 150 Hz) for mounting on DIN rail no drilling according to EN
- up to 5 g (at 10 to 150 Hz) 60715, with end bracket
Included in delivery 1 x end plate BL67
Direct mounting Two mounting holes, Ø 6 mm
Shock test Acc. to IEC 60068-2-27
Vibration test Acc. to EN 61131
Drop and topple acc. to IEC 68-2-31 and free fall to IEC 68-2-32
Storage temperature from -40 to 85 °C
> 55 °C Circulating air (Ventilation) Derating: Max. power consumption = 5 A
- up to 20 g (at 10 up to 150 Hz) for mounting on base plate or machinery Therefore
- up to 20 g (at 10 up to 150 Hz) every second module has to be mounted with two
- up to 20 g (at 10 up to 150 Hz) screws each.
Electromagnetic compatibility (EMC) Acc. to EN 61131-2
Degree of protection (IP) IP67

Allgemein

Nominal current from module bus ≤ 100 mA
Field supply 24 VDC
Admissible range 18…30 VDC
System power supply 24 VDC/5 VDC
Fieldbus addressing Rotary switch, PGM, DHCP
Max. system supply current 1.2 A
Max. field supply current 10 A
max. load current Io 10 A
Transmission rate fieldbus 10/100 Mbps, Full/Half Duplex, Auto Negotiation,
Transmission rate fieldbus Auto Crossing
Max. sensor supply I sens 4 A Short circuit fuse
Supply voltage 24 VDC
Connection technology fieldbus 2 × M12, 4-pin, D-coded
Connection technology power supply 7/8″, 5-pin

Modbus TCP

Addressing Static IP, DHCP
Input Data Size max. 1024 register
Supported function codes FC1, FC2, FC3, FC4, FC5, FC6, FC15, FC16, FC23
Output register start address 0 (0x0000 hex)
Input register start address 0 (0x0000 hex)
Output Data Size max. 1024 register

EtherNet/IP™

Addressing acc. to EtherNet/IP specification
Input Data Size 248 INT
Output Data Size 248 INT
Device Level Ring (DLR) not supported

PROFINET

Addressing DCP
Diagnostics acc. to PROFINET alarm handling
Input Data Size max. 512 BYTE
Topology detection supported
Ambient temperature from -25 to 70 °C
Dimensions (L x W x H) 74 x 145 x 77.5 mm
MinCycleTime 1 ms
Automatic addressing supported
Output Data Size max. 512 BYTE
Media Redundancy Protocol (MRP) not supported
Conformance class B (RT)