Turck
Turck
NIMFE-EM12/4.0L61-UN6X-H1141/S1182 Magnetic Field Sensor – With TIN Coating For Detection of Ferromagnetic Parts
SKU: 1600622 Type: NIMFE-EM12/4.0L61-UN6X-H1141/
S1182
Available3–5 business days delivery
€329.00 / pieces
€391.51 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Threaded barrel, M12 x 1
- Stainless steel, 1.4301
- DC 3-wire, 10…30 VDC
- NC/NO parametrizable with teach adapter VB2‐SP1
- M12 x 1 male connector
Functional principle
The weld sensors are available in different versions, with different signal intensities and diameters. Ferromagnetic parts which differ strongly in their material properties and diameters can thus be detected. A component to be detected must be located within the socalled optimal sensitive area in order to be detected. This optimal sensitive area has a width of 0.5 mm and is laser-engraved on the tip of the probe, 11. 9 mm above of the M12 thread.
Electrical data
| DC rated operating current Ie | ≤ 100 mA |
| Wire break/reverse polarity protection | yes/Complete |
| Isolation test voltage | 0.5 kV |
| Voltage drop at Ie | ≤ 1 V |
| Short circuit protection | yes/Cyclic |
| Output function | 3-wire, Connection programmable, NPN |
| No-load current | up to 15 mA |
| Residual current | ≤ 0.1 mA |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage | from 10 to 30 V |
Ambient Conditions
| Display switch state | LED, Yellow |
| Display operating voltage | LED, Green |
| Vibration resistance | 55 Hz (1 mm) |
| MTTF | 874 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -25 to 70 °C |
| Shock resistance | 30 g (11 ms) |
| Degree of protection (IP) | IP67 |
Mechanical data
| Active area material | Stainless steel, 1.4301 (AISI 304), TIN |
| Active area material | coating |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Design | Threaded barrel, M12 x 1 |
| Max. tightening torque of housing nut | 10 Nm |
| Housing material | Stainless steel, 1.4301 (AISI 304) |
| Abmessung | 61 mm |
Allgemein
| Remark to product | Optimized for the detection of weld nuts |
| Remark to product | of the size of M5 to M10 |
| Special version | S1182 Corresponds to:TIN coating |
Other
| Design | Gewinderohr |
| Housing material | Edelstahl |
| Connector type | M12 |
| Switching output | NPN |
