Turck
Turck
Inclinometer – With Switching Outputs
SKU: 100026933 Type: B1N360V-QR20-2UPN6X3-H1141
Available3–5 business days delivery
€195.00 / pieces
€232.05 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Rectangular, plastic, Ultem
- Status displayed via LED
- Angle detection via one axis with 360 ° measuring range and two freely configurable switching outputs (PNP/NPN)
- High protection class IP68/IP69K
- Protected against salt spray and rapid temperature change
- 10…30 V DC
- Male connector, M12 × 1, 4-pin
- Parameterization via IO-Link with USB-2IOL-0002
Functional principle
The inclinometers use an acceleration measuring cell to determine the angle. The Earth's gravity is used as a reference. If the inclinometer changes its angle relative to the Earth's gravity, this is detected by the acceleration measuring cell. The robust sensors are positioned with the cast side on a flat surface so that the casting compound is covered. The sensor is then secured with two screws.
Electrical data
| DC rated operating current Ie | ≤ 200 mA |
| Wire break/reverse polarity protection | yes |
| Isolation test voltage | 0.5 kV |
| Electricity consumption | up to 50 mA |
| Output function | 4-pin, NO/NC, PNP/NPN |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage | from 10 to 30 V |
Ambient Conditions
| Display switch state | 2 × LEDs, Yellow |
| Display operating voltage | LED, Green |
| Vibration resistance | 20 g; 5 h/Achse; 3 Achsen |
| MTTF | 548 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -40 to 85 °C |
| Temperature changes (EN60068-2-14) | -40… +85 °C; 20 cycles |
| UL Certificate | E351232 |
| Shock resistance | 150 g; 4 ms ½ sine |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP68 |
General data
| Number of measurement axes | 1 |
| Temperature drift | ≤ ± 0.006 %/K |
| Repeatability | ≤ 0.05 % of full scale |
| Measuring range | 0…360 ° |
Mechanical data
| Elektrischer Anschluss | Connector, M12 × 1 |
| Design | Rectangular, QR20 |
| Housing material | Plastic, Ultem |
| Abmessung | 71.6 x 62.6 x 20 mm |
Allgemein
| Measurement principle | Acceleration |
Other
| Design | Quader |
| Housing material | Kunststoff |
| Connector type | M12 |
| Switching output | Schließer/Öffner |
| Switching output | PNP |
| Switching output | NPN |
- Adapter plate for mounting the QR20 housing with mounting holes for the Q20L60 housing100029224
