Processor Unit – For the Connection of FCS and FCI Product Series Flow Sensors IO-Link Device with Current and Transistor Switching Outputs

Name: Processor Unit – For the Connection of FCS and FCI Product Series Flow Sensors IO-Link Device with Current and Transistor Switching Outputs
Brand: Turck
SKU: 7525104
Price: 302.2 EUR
Availability: InStock

SKU: 7525104 Type: FM-IM-2UPLI63X

Available 3–5 business days delivery

€302.20 / pieces

€359.62 incl. VAT

Data sheet

Features

• Analog output for flow
• Transistor switching outputs for temperature and faults
• Teaching upper and lower flow limit
• LED band for indication of flow rate and media temperature
• Monitoring of operating and display range
• Detection of wire-break and short-circuit on the sensor side
• Standard IO or IO-Link operating mode
• Parametrized via pushbutton or software-supported via IO-Link

Customizable output functions

Error recognition	NAMUR error limits
Current range	4…20 mA / 20…4 mA parametrizable
Display switch state	active high / active low parametrizable
Display switch state	(transistor output error monitoring only
Display switch state	active low)
Switching characteristic	PNP
Load	< 600 Ω
Error monitoring	transistor output
Characteristic	Output of probe signal, no linearization
Flow Monitoring	Analog output
Electrical connections	5-pole removable reverse polarity protected terminal blocks
Type of fastening	screw connection
Temperature monitoring	transistor output
Switching current	100 mA
Terminal cross-section	≥ 1.5…≤ 2.5 mm²
Switching voltage	from 20 to 30 V

Mechanical data

Flow	yellow on Active current output
Flow	flashing Teach mode / display of diagnostic data
Flow	for specification see manual
Flow	Value 10 Bit (Bit 15 = MSB, Bit 6 = LSB) not assigned Out 3 Out 2 Out1
Flow	(Fault) (Temp) (Flow)
Temp	yellow off Switching output media temperature [low]
Temp	on Switching output media temperature [high]
Temp	flashing Teach mode / display of diagnostic data
Temp	for specification see manual
MTBF	117 Years
Mounting method	DIN rail mounting and mounting panel
Bit 15	14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Ambient temperature	from -25 to 70 °C
Design	Signal processor
PWR	green on Operating voltage applied
PWR	Device ready for operation
PWR	flashing Operating voltage applied
PWR	IO-Link communication active
PWR	(inverted flash with T on 900 ms and T off 100 ms)
LED displa	y
LED	Color Status Description
Housing material	Plastic, Polycarbonate/ABS
Fault	Red Off Switching output fault [high]
Fault	On Switching output flow [low]
Fault	(for error pattern in combination with LEDs see manual)
For detaile IM/FMX-IM IO-Link (Pr	d description of the display patterns and flashing codes see instructi
For detaile IM/FMX-IM IO-Link (Pr	ocess Data Objects)
Degree of protection (IP)	IP20
Abmessung	89 x 110 x 27 mm

IO-Link

Transmission rate	38.4 kBit/s (COM 2)
Communication modes	Tool based engineering via FDT / DTM,
Communication modes	IODD. Acyclic communication via On-Request Data Objects
Included in the SIDI GSDML	Yes
Communication channel	Clamp 12 and via front panel jack COM
Communication channel	(PC)
IO-Link specification	V 1.0

Electrical data

Measurement frequency	5 Hz (every 200 ms with software filter)
Sensor current limitation	approx. 110 mA
Repeatability media temperature	typical ± 1 K
Medium temperature	[°C] with the SET button temporarily
Medium temperature	pressed
Measuring accuracy media temperature	typical ± 7 K
Sensor current	≤ 35 mA
Sensor voltage	≤ 15 VDC
No-load current I0	≤ 63 mA
Teach modes	Min/max adjustment. Teach modes incl.
Teach modes	DeltaFlow monitoring (teach modes are
Teach modes	automatically released with the change of
Teach modes	flow speed).
Input function	Connection of flow sensors (non-Ex sensors of the FCS/FCI product series only!)
Flow speed	[%] after min/max adjustment (permanent)
Switchpoint hysteresis media temperature	2 K
Repeatability flow rate	typical ± 1 % (of full scale)
Operating voltage UB	from 20 to 30 VDC
Power consumption	up to 4.5 VA