Turck
Turck
Ultrasonic Sensor – Diffuse Mode Sensor
SKU: 100003035 Type: RU100U-EMT18E-LI8X2-H1151
Available3–5 business days delivery
€262.30 / pieces
€312.14 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Sonic transducer face with PTFE layer
- • Stainless steel front attachment
- Cylindrical housing M18, potted
- Connection via M12 × 1 male connector
- Temperature compensation
- Blind zone: 15 cm
- Range: 100 cm
- Resolution: 1 mm
- Aperture angle of sonic cone: ±16 °
- Analog output, 4…20 mA, additional switching output, PNP
Functional principle
Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-7, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries.
Electrical data
| DC rated operating current Ie | ≤ 150 mA |
| Standby delay | ≤ 300 ms |
| Response time typical | < 90 ms |
| Current output | 4…20 mA |
| Load resistance (current output) | ≤ 1000 Ω |
| Wire breakage protection | yes |
| Switching frequency | up to 6.9 Hz |
| Adjustment option | Remote Teach |
| Short circuit protection | yes/Cyclic |
| Polarity protection | yes |
| Output function | Analog output |
| Load resistance current output | ≤ 0.5 kΩ |
| Output 1 | Analog output |
| Residual ripple | 10 % Uss |
| No-load current | up to 50 mA |
| Operating voltage | from 15 to 30 V |
Mechanical data
| Display switch state | LED, Yellow |
| Elektrischer Anschluss | Connector, M12 × 1, 5-wire |
| Pressure resistance | 0.5…5 bar |
| Object detected | LED, Green |
| Ambient temperature | from -5 to 50 °C |
| Storage temperature | from -40 to 50 °C |
| Transducer material | Plastic, Epoxy resin and PU foam with |
| Transducer material | PTFE coating |
| Design | Threaded barrel, M18 |
| Max. tightening torque of housing nut | 20 Nm |
| Radiation direction | straight |
| Housing material | Stainless steel, 1.4404 (AISI 316L), |
| Housing material | PTFE-coated |
| Degree of protection (IP) | IP67 |
| Abmessung | Ø 18 x 75 mm |
Ultrasonic data
| Edge lengths of the nominal actuator | 100 mm |
| Temperature drift | ± 1.5 % of full scale |
| Function | Proximity switch |
| Resolution | 1 mm |
| Approach speed | ≤ 8 m/s |
| Overrun Speed | ≤ 2 m/s |
| Ultrasound frequency | 200 kHz |
| Range | from 0.15 to 1 m |
| Minimum switching range | 100 mm |
| Linearity error | ≤ ± 0.5 % |
| Repeatability | ≤ 0.15 % of full scale |
| Minimum measuring range | 100 mm |
Tests/approvals
| Vibration resistance | 20 g, 10…55 Hz, sine, 3 axes, 30 min/axis according to IEC 60068-2-6 |
| MTTF | acc. to SN 29500 (Ed. 99) 40 °C |
| Declaration of conformity EN ISO/IEC | EN 60947-5-7 |
| Shock test | 30 g, 11 ms, half sine, 3 axes according |
| Shock test | to IEC 60068-2-27 |
| Approvals | cULus |
| Approvals | CE |
Other
| Design | Gewinderohr |
| Housing material | Edelstahl |
| Housing material | PTFE |
| Analog output | 4…20 mA |
| Connector type | M12 |
