HomePosition SensorsCylinder Sensors46250
TurckMagnetic Field Sensor – For Pneumatic Cylinders – Image 1
Turck

Magnetic Field Sensor – For Pneumatic Cylinders

SKU: 46250 Type: BIM-PST-AP6X-V1131
Available3–5 business days delivery
€61.90 / pieces
€73.66 incl. VAT

These are our list prices.Get an individual quote within 24 h.

Request a quote
Data sheet

Features

  • Rectangular, height 16 mm
  • Active face in front
  • Plastic, PA12‐GF30
  • Magnetic-inductive sensor
  • 3‐wire DC, 10…30 VDC
  • NO contact, PNP output
  • Male M8 x 1

Functional principle

Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder.

Electrical data

DC rated operating current Ie≤ 200 mA
Switching frequency1 kHz
Wire break/reverse polarity protectionyes/Complete
Isolation test voltage0.5 kV
Voltage drop at Ie≤ 1.8 V
Short circuit protectionyes/Cyclic
Output function3-wire, NO contact, PNP
No-load currentup to 15 mA
Residual current≤ 0.1 mA
Ripple Uss≤ 10 % UBmax
Operating voltagefrom 10 to 30 V

Mounting on the following profiles

Display switch stateLED, Yellow
Included in deliveryKLP25
Cylinder designE

Mechanical data

Active area materialPlastic, PA12-GF30
Elektrischer AnschlussConnector, M8 × 1
DesignRectangular, PST
Housing materialPlastic, PA12-GF30
Abmessung23 x 14 x 16 mm

Ambient Conditions

Vibration resistance55 Hz (1 mm)
MTTF2283 years acc. to SN 29500 (Ed. 99) 40
MTTF°C
Ambient temperaturefrom -25 to 70 °C
Shock resistance30 g (11 ms)
Degree of protection (IP)IP67

General data

Temperature drift≤ 0.1 mm
Overrun Speed≤ 10 m/s
Hysteresis≤ 1 mm
Repeatability≤ ± 0.1 mm

Other

DesignQuader
Housing materialKunststoff
Connector typeM8
Switching outputSchließer/Öffner
Switching outputPNP