Flow Monitoring – Immersion Sensor without Integrated Processor
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Sensor for liquid media
- Calorimetric functionality
- Adjustment via signal processor
- Status indicated via LED chain on signal processor
- Cable: 10 m
- Cable device
- 4‐wire connection to the processor
Functional principle
Our insertion - flow sensors operate on the principle of thermodynamics. The measuring probe is heated by several °C as against the flow medium. When fluid moves along the probe, the heat generated in the probe is dissipated. The resulting temperature is measured and compared to the medium temperature. The flow status of every medium can be derived from the evaluated temperature difference. Thus TURCK's wearfree flow sensors reliably monitor the flow of gaseous and liquid media. Signal processor for non-Ex flow sensors from the FC….-NA… family; operating voltage 20…30 VDC; LED bar for displaying flow speed and medium temperature; IO-Link device with transistor outputs for flow, temperature and errors
Allgemein
| Water Operating Range | 1…100 cm/s |
| Oil Operating Range | 3…200 cm/s |
| Temperature jump, response time | max. 12 s |
| Switch-off time | typ. 2 s (1…13 s) |
| Switch-on time | typ. 2 s (1…13 s) |
| Standby time | typ. 8 s (2…18 s) |
| Medium temperature | from -20 to 85 °C |
| Installation conditions | Immersion sensor |
| Temperature gradient | ≤ 250 K/min |
Mechanical data
| Sensor material | Stainless steel, 1.4571 (AISI 316Ti) |
| Elektrischer Anschluss | Cable |
| Cable Jacket Material | PVC |
| Pressure resistance | 60 bar |
| Wire length | 10 m |
| Process connection | G 1/2'' |
| Design | Immersion |
| Max. tightening torque of housing nut | 30 Nm |
| Core cross-section | 4 x 0.25 mm2 |
| Housing material | Stainless steel, 1.4571 (AISI 316Ti) |
Electrical data
| Degree of protection (IP) | IP68 |
Other
| Process connection | G1/2 |
| Design | Eintauch |
| Housing material | Edelstahl |
| Connector type | Kabel |
Processor Unit – For the Connection of FCS and FCI Product Series Flow Sensors IO-Link Device with Transistor Switching Outputs7525100- Processor Unit – For the Connection of FCS and FCI Product Series Flow Sensors IO-Link Device with Relay Switching Outputs7525102
Processor Unit – For the Connection of FCS and FCI Product Series Flow Sensors IO-Link Device with Current and Transistor Switching Outputs7525104