Turck
Turck
Inductive Sensor – IO-Link Communication
SKU: 100000266 Type: BI15U-EM30WD-IOL6X2-H1141
Available3–5 business days delivery
€132.90 / pieces
€158.15 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Threaded barrel, M30 x 1.5
- Stainless steel, 1.4301
- Front cap made of liquid crystal polymer
- Factor 1 for all metals
- Resistant to magnetic fields
- For temperatures of -40 °C…+100 °C
- High protection class IP69K for harsh environments
- Special double-lip seal
- Protection against all common acidic and alkaline cleaning agents
- Laser engraved label, permanently legible
- DC 4-wire, 10…30 VDC
- M12 x 1 connector
- Configuration and communication via IOLink v1.1 or via standard I/O
- Electrical outputs independently configurable
- Switching distance can be parametrized per output and hysteresis
- Identification via 32-byte memory
- Temperature monitoring with adjustable limits
- Various timer and pulse monitoring functions
Functional principle
Inductive sensors are designed for wear-free and contactless detection of metal objects. uprox+ sensors have significant advantages due to their patented multi-coil system. They excel thanks to their optimum switching distances, maximum flexibility and operational reliability as well as efficient standardization.
Electrical data
| DC rated operating current Ie | ≤ 150 mA |
| Switching frequency | 1 kHz |
| Wire break/reverse polarity protection | yes/Complete |
| Isolation test voltage | 0.5 kV |
| AC field stability | 300 mTSS |
| Voltage drop at Ie | ≤ 1.8 V |
| Short circuit protection | yes/Cyclic |
| Output function | 4-wire, NO/NC, PNP/NPN |
| Output 1 | Switching output or IO-Link mode |
| Output 2 | Switching output |
| Communication protocol | IO-Link |
| DC field stability | 300 mT |
| No-load current | up to 27 mA |
| Residual current | ≤ 0.1 mA |
| Ripple Uss | ≤ 10 % UBmax |
| Operating voltage | from 10 to 30 V |
| Electrical safety class | III |
General data
| Rated switching distance | 15 mm |
| Secured operating distance | ≤ (0.81 × Sn) mm |
| Temperature drift | ≤ ±10 % |
| Temperature drift | ≤ ± 20 %, ≤ ‐25 °C , ≥ +70 °C |
| Hysteresis | 3…15 % |
| Repeatability | ≤ 2 % of full scale |
| Installation conditions | Flush |
Ambient Conditions
| Display switch state | LED, Yellow |
| Display operating voltage | LED, Green |
| Vibration resistance | 55 Hz (1 mm) |
| MTTF | 874 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Ambient temperature | from -40 to 100 °C |
| Shock resistance | 100 g (11 ms) |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP68 |
Mechanical data
| Admissible pressure on front cap | ≤ 10 bar |
| Active area material | Plastic, LCP |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Design | Threaded barrel, M30 x 1.5 |
| Max. tightening torque of housing nut | 75 Nm |
| Housing material | Stainless steel, 1.4301 (AISI 304) |
| Abmessung | 62 mm |
IO-Link
| Maximum Cable Length | 20 m |
| IO-Link port type | Class A |
| Communication mode | COM 2 (38.4 kBaud) |
| Function pin 4 | IO-Link |
| Function Pin 2 | DI |
| Frame type | 2.2 |
| Process data width | 16 bit |
| Minimum cycle time | 8 ms |
| Status bit information | 3 bit |
| Included in the SIDI GSDML | Yes |
| Switchpoint information | 2 bit |
| IO-Link specification | V 1.1 |
Other
| Design | Gewinderohr |
| Housing material | Edelstahl |
| Connector type | M12 |
| Switching output | Schließer/Öffner |
| Switching output | PNP |
| Switching output | NPN |
