Turck
Turck
Radar Sensor – Scanner for Object and Position Detection
SKU: 100041054 Type: MR15-Q80-IOLCJ-H1141
Available 3–5 business days delivery
€849.00 / pieces
€1,010.31 incl. VAT
Features
- • Blind zone: 35 cm
- • Range: 15 m
- • Distance accuracy: ± 2 mm
- • Angular accuracy: ±5°
- • 3D sensing range: Adjustable max. 120°
- • Information about distance, angle, and object speed
- • Radius and zone evaluation
- • Data visualization via Turck Radar Monitor
- • Approved acc. to ETSI 305550-2
- • Approved acc. to FCC/CFR 47 Part 15.
- • 2 × M12 × 1, 1 × 4-pin, 1 × 5-pin
- • Operating voltage 9…33 VDC
- • Switching output switchable between PNP/ NPN
- • IO-Link, SSP 4
- • SAE J1939
- • Rectangular 80 × 80
- • Housing material PBT, AlSi10Mg
Electrical data
| DC rated operating current Ie | ≤ 250 mA |
| Standby delay | ≤ 300 ms |
| Response time typical | < 70 ms |
| Switching frequency | up to 10 Hz |
| Voltage drop at Ie | ≤ 2 V |
| Short circuit protection | yes/Cyclic |
| Polarity protection | yes |
| Output function | NO/NC programmable, PNP/NPN |
| Output 2 | Switching output |
| Communication protocol | IO-Link |
| Communication protocol | SAE J1939 |
| Residual ripple | < 10 % Uss |
| No-load current | up to 400 mA |
| Operating voltage UB | from 9 to 33 VDC |
Mechanical data
| Display switch state | 3-color LED, Yellow |
| Display operating voltage | LED, Green |
| EMC | EN 61000-6-2:2019 |
| EMC | ETSI EN 301489-3 v.1.6.1 |
| Vibration resistance | 20 g (10…2000Hz), |
| Elektrischer Anschluss | Connector, M12 × 1 |
| Ambient temperature | from -40 to 85 °C |
| Shock test | EN 60068-2-27 |
| Approvals | cULus |
| Approvals | CE |
| Approvals | FCC |
| Approvals | ETSI |
| Storage temperature | from -40 to 85 °C |
| Design | Rectangular, Q80 |
| Housing material | Plastic, PBT-GF20 |
| Housing material | Die-cast aluminum alloy |
| Shock resistance | 100 g (11 ms) |
| Degree of protection (IP) | IP67 |
| Degree of protection (IP) | IP69K |
| Degree of protection (IP) | IP68 |
| Abmessung | 90.6 x 80 x 34.6 mm |
IO-Link
| Maximum Cable Length | 20 m |
| IO-Link port type | Class A |
| Communication mode | COM 3 (230.4 kBaud) |
| Function pin 4 | IO-Link |
| Function Pin 2 | DI |
| Frame type | 2.2 |
| Process data width | 128 bit |
| Minimum cycle time | 3 ms |
| Profile support | Smart Sensor Profile |
| Switchpoint information | 17 bit |
| IO-Link specification | V 1.1 |
| Measured value information | 128 bit |
Radar data
| Edge lengths of the nominal actuator | 100 mm |
| Function | Radar scanner |
| Resolution | 1 mm |
| Output power ERP | 10 dBm |
| Range | from 0.35 to 15 m |
| Minimum switching range | 50 mm |
| Linearity error | ≤ ± 0.3 % |
| Opening angle | 120 ° |
| Repeatability | 4 mm |
| Frequency range | from 60000000000 to 64000000000 Hz |
| Output power EIRP | 20 dBm |