Turck
Turck
Ultrasonic Sensor – Diffuse Mode Sensor
SKU: 100000279 Type: RU40U-M12-AP6X2-H1141
Available3–5 business days delivery
€211.70 / pieces
€251.92 incl. VAT
These are our list prices.Get an individual quote within 24 h.
Request a quoteFeatures
- Smooth sonic transducer face
- Cylindrical housing M12, potted
- Connection via M12 × 1 male connector
- Teach range adjustable via connection cable
- Blind zone: 4 cm
- Range: 40 cm
- Resolution: 0.5 mm
- Aperture angle of sonic cone: ±15 °
- Switching output, PNP, programmable via IO-Link
- NO/NC programmable
- IO-Link
Functional principle
Ultrasonic sensors capture a multitude of objects contactlessly and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or non-metallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. The sonic cone diagram indicates the detection range of the sensor. In accordance with standard EN 60947-5-2, quadratic targets in a range of sizes (20 × 20 mm, 100 × 100 mm) and a round rod with a diameter of 27 mm are used. Important: The detection ranges for other targets may differ from those for standard targets due to the different reflection properties and geometries.
Electrical data
| DC rated operating current Ie | ≤ 150 mA |
| Standby delay | ≤ 300 ms |
| Response time typical | < 60 ms |
| Wire breakage protection | yes |
| Switching frequency | up to 10.4 Hz |
| Voltage drop at Ie | ≤ 2.5 V |
| Adjustment option | Remote Teach |
| Adjustment option | IO-Link |
| Hysteresis | ≤ 5 mm |
| Short circuit protection | yes/Cyclic |
| Polarity protection | yes |
| Output function | NO/NC, PNP |
| Communication protocol | IO-Link |
| Residual ripple | 10 % Uss |
| No-load current | up to 50 mA |
| Residual current | ≤ 0.1 mA |
| Operating voltage | from 10 to 30 V |
Mechanical data
| Display switch state | LED, Yellow |
| Elektrischer Anschluss | Connector, M12 × 1, 4-wire |
| Pressure resistance | 0.5…5 bar |
| Object detected | LED, Green |
| Ambient temperature | from -10 to 60 °C |
| Storage temperature | from -40 to 80 °C |
| Transducer material | Plastic, Epoxyd resin and PU foam |
| Design | Threaded barrel, M12 |
| Max. tightening torque of housing nut | 20 Nm |
| Radiation direction | straight |
| Housing material | Metal, CuZn, Chrome-plated |
| Degree of protection (IP) | IP67 |
| Abmessung | Ø 12 x 72.5 mm |
IO-Link
| Maximum Cable Length | 20 m |
| IO-Link port type | Class A |
| Communication mode | COM 2 (38.4 kBaud) |
| Function pin 4 | IO-Link |
| Function Pin 2 | DI |
| Frame type | 2.2 |
| Process data width | 16 bit |
| Minimum cycle time | 2 ms |
| Profile support | Smart Sensor Profile |
| Included in the SIDI GSDML | Yes |
| Switchpoint information | 1 bit |
| IO-Link specification | V 1.1 |
| Measured value information | 15 bit |
Ultrasonic data
| Edge lengths of the nominal actuator | 20 mm |
| Function | Proximity switch |
| Resolution | 0.5 mm |
| Approach speed | ≤ 5 m/s |
| Overrun Speed | ≤ 2.9 m/s |
| Ultrasound frequency | 300 kHz |
| Range | from 0.04 to 0.4 m |
| Minimum switching range | 3 mm |
| Linearity error | ≤ ± 0.5 % |
| Repeatability | ≤ 0.15 % of full scale |
Tests/approvals
| Vibration resistance | 20 g, 10…55 Hz, sine, 3 axes, 30 min/axis according to IEC 60068-2-6 |
| MTTF | 377 years acc. to SN 29500 (Ed. 99) 40 |
| MTTF | °C |
| Declaration of conformity EN ISO/IEC | EN 60947-5-2 |
| Shock test | 30 g, 11 ms, half sine, 3 axes according |
| Shock test | to IEC 60068-2-27 |
| Approvals | cULus |
| Approvals | CE |
Other
| Design | Gewinderohr |
| Housing material | Messing |
| Connector type | M12 |
| Switching output | Schließer/Öffner |
| Switching output | PNP |
